How to fix spikes in stuttering, freezing and lag in Rust

Rust is all about survival, but some players are experiencing issues that aren’t based on the game’s open world. This is because various performance issues can cause stuttering, lag spikes, and freezing. Not only do they break the sense of immersion, but they can make the act of survival much more difficult. Fortunately, stuttering and other types of frame rate issues can be fixed with a few basic tweaks.

How to fix spikes in stuttering, freezing and lag in Rust

If you’re experiencing spikes, stuttering, freezes, or dropped frames in Rust, it’s time to look into your hardware. These fixes are aimed specifically at PC gamers experiencing performance issues. Hardware aside, you can improve the frame rate and reduce stuttering with software adjustments.

First things first: make sure your system meets the game’s minimum system requirements. Rust is now several years old, but the system requirements still require a moderate amount of power:

  • CPU: Intel Core i7-3770 or AMD FX-9590
  • GPU: 2GB Nvidia GTX 670 or AMD R9 280
  • RAM: 10 GB
  • Memory: 20 GB available (SSD recommended)
  • Operating system: Windows 8.1 / 10 64-bit

If you try to run the game with requirements below the minimum requirements, you are likely to stutter or stutter. This is especially true when you consider the overall system memory, hence the lofty recommendation of 10GB. According to many accounts, 8GB won’t cut it. The same can be said for the GPU memory requirements, as graphics cards with less than 2GB of memory will have a hard time loading textures.

Performance issues with high graphics settings

This leads to a second common problem: asking too much of your computer. Rust has a reputation for demanding a lot from a PC. Especially when it comes to underpowered hardware, gamers may find they are pushing their PC too hard. At maximum performance levels, they risk overheating components, causing the system to throttle performance or otherwise risk burning.

Fortunately, the solution here is simple. Freezing, stuttering, and lagging in general can be minimized by reducing the game’s graphics settings. Lowering the running resolution or texture details should be enough to start seeing smoother performance.

There is also another solution recommended by the Rust community: run the game in full screen. Windowed modes only seem to make matters worse, as the operating system won’t focus solely on game performance.

Some servers tend to stammer

Unfortunately, even gamers with powerful computers will encounter frame rate issues. In many cases, they have found that stuttering and lag reduce or disappear altogether when switching servers. If your PC is more than up to the task, try playing on a closer or less populated server. This may not be ideal in all cases, but the benefit is that you will be able to enjoy the game with minimal distractions.

Advanced Stuttering Correction: Adjust the waste collection cycle

This last fix is ​​one of the most common tips from power users. It involves adjusting the game’s automatic memory management, usually referred to as garbage collection. While closely monitoring system performance, gamers noted that stuttering and lag spikes occurred right at the start of the garbage collection cycle. Knowing this, the obvious solution to correcting stuttering is to change the frequency at which garbage collection occurs.

The base version of this fix was specified by Facepunch Studios’ Blog Rust last year. A much more detailed explanation can be found on the Rest subreddit , including an official response from a Facepunch representative. We hesitate to give some shorthand advice here, as the changes required are highly dependent on your PC, particularly the amount of system RAM.

That said, we can at least outline how this fix works. It involves changing the value of convar gc.buffer to something other than the default value of 256. With this default setting, the game will attempt to reset memory usage once it exceeds 128 megabytes. As long as you have a lot of extra RAM, you can reduce the garbage collection interval by increasing the buffer value to something like 2048. This will minimize frame rate drops and stuttering by virtue of running memory management procedures less often. .

In general, you can fix lag spikes, stuttering, and freezing in Rust by making sure your PC meets the minimum or recommended specs. Lowering graphics settings is the common way to increase frame rate, and lag can often be minimized by switching to a better server. Barring anything else, you can significantly reduce stuttering by adjusting the frequency of garbage collection. It may seem like a lot of work, but these fixes should result in a much smoother experience overall.

 

by Abdullah Sam
I’m a teacher, researcher and writer. I write about study subjects to improve the learning of college and university students. I write top Quality study notes Mostly, Tech, Games, Education, And Solutions/Tips and Tricks. I am a person who helps students to acquire knowledge, competence or virtue.

Leave a Comment