How to fix PC error code 0xc00000e in Windows 10

System errors like 0xc00000e are never welcome. Microsoft improved Windows 10’s built-in troubleshooting tool a bit, which makes them seem a bit more tame, but don’t let that make you think they’ll be easy to fix.

This error can occur for various reasons, but our main contender is always a bad boot sector. If you suddenly come across this problem and are not sure how to solve it, be sure to check out the solutions below.

Contents index

  • How do I resolve error 0xc00000e in Windows 10
    • Solution 1 – Check the hardware
    • Solution 2 – Rebuild the BCR registry hive
    • Solution 3 – Check BIOS settings

How do I resolve error 0xc00000e in Windows 10

?

Solution 1 – Check the hardware

The first is the first. This error occurs mainly due to the corruption of the BCR (bootloader). However, it is not unusual for hardware changes to also invoke such a critical system error. Therefore, before moving on to advanced software troubleshooting, make sure to remove and unplug all the peripheral devices that you have recently connected.

Also, restart your PC several times and check for changes. Our assumption is that hardware can also cause this problem, but due to the diversity of possible configurations and scenarios, we cannot be sure. If you’re still seeing that slightly brighter but no less intimidating Blue Screen of Death, continue with the steps below.

You can also try temporarily removing hard drives from RAM and not from the system and reinserting them. This may require some tools and also, it is recommended to remove the power cord. After you have removed everything and tried to boot, try to find the reason for the boot problem using the removal system.

Solution 2 – Rebuild the BCR registry hive

Once we’ve eliminated hardware as a possible culprit, let’s move on to a more likely source of our problem. BCD (Boot Configuration Data) or MBR (Master Boot Record) are configuration files that most users have never heard of. They are responsible for the boot sequence and, together with BIOS (UEFI) and winload.exe, allow your system to boot.

Now, it is difficult to say how it happens, but they can have flaws and then problems arise. And that’s not the usual simple problem that can be solved within the Windows interface. Fortunately, there is a way to repair and reset the boot sector files again, which should be the resolution of error 0xc00000e .

Yes, the hitch is on the installation media that you must obtain in order to repair it. This can be done with the Media Creation tool in a few easy steps. Once you have purchased a bootable media with Windows 10 installation, please follow the steps below:

  1. Connect or insert the Windows 10 startup device (USB stick or DVD).
  2. Restart your PC.
  3. Enter into the boot menu or BIOS setup to change the boot order. Set the multimedia drive (USB or DVD) as the primary boot device and press any key to boot.
  4. Wait for the system files to finish loading.
  5. Select your preferences and press the » Next « button .
  6. Select “Repair your computer” in the lower left corner.
  7. Open Troubleshooting from the selection menu.
  8. Select Advanced Options .
  9. Open Command Prompt . If prompted, choose the account and enter the password.
  10. At the command line, type the following commands and press Enter after each one:
    • bootrec / FixMbr
    • bootrec / FixBoot
    • bootrec / ScanOs
    • bootrec / RebuildBcd
  11. Exit, remove the installation drive, and try to boot the system normally.

After this procedure, you should be able to start Windows 10 as before.

Solution 3 – Check BIOS settings

If the CMOS battery runs out, your BIOS settings (including time) cannot be preserved. What you will have to do is replace your motherboard battery (3V battery similar to a wristwatch most of the time). After that, you should reconfigure the BIOS settings and restart your PC. Hopefully that might be enough to resolve this error and pass the Blue Screen of Death.

If you are not sure how to do it, please follow the instructions below:

  1. Turn off your PC completely.
  2. Unplug the power cord and remove the battery in case it is a laptop.
  3. Press and hold the power button for 60 seconds to fully discharge your PC.
  4. Open the PC case with a screwdriver and touch a metal surface to discharge your own static electricity.
  5. Remove the CMOS button battery. You should locate your socket easily
  6. Insert a new battery into the socket.
  7. Start your PC and configure BIOS .
  8. Commit the changes and look for improvements.

That should be the bottom line. Lastly, a friendly tip that should keep you away from this and other similar critical errors: if you format the system partition, don’t delete the boot section as well. It is about 150 MB and stores all the boot configurations. If you mess with him, you will have to face a lot of problems.

by Abdullah Sam
I’m a teacher, researcher and writer. I write about study subjects to improve the learning of college and university students. I write top Quality study notes Mostly, Tech, Games, Education, And Solutions/Tips and Tricks. I am a person who helps students to acquire knowledge, competence or virtue.

Leave a Comment