How to fix error code 0xc0000005 in Windows 10

Sometimes, Windows does not work correctly due to error 0xc0000005 which displays a message regarding an application crash. If you want to know how to fix the error code 0xc0000005 of a program in Windows 10 ? Pay attention to this article because it offers you an effective answer in this regard.

How to fix error code 0xc0000005 of a program in Windows 10?

The Windows 10 operating system has a list of error codes to indicate that there is a particular fault. Generally, the identification of the error code allows the user to recognize the reason for the failure and to find an ideal solution.

Here is all the information you should know about error code 0xc0000005 and how to solve it in Windows 10.

What is an error code?

An error code is a message that shows a failure of either a specific application, hardware, or incorrect data entry. Windows presents the error code through a series of numbers where each series identifies the cause of the failure.

What is the format of the error codes?

Windows uses a hexadecimal format to identify error codes and they start with a 0x. It is common to represent error codes in abbreviated form by removing all zeros after the x.

Frequent error codes

The error codes that occur the most are the STOP or Bug Check Code. These are also called blue screen errors or “Blue Screen of Death” BSOD . These codes represent a serious error that affects the operating system so it proceeds to restart the computer.

Error code 0xc0000005 in Windows 10

Error code 0xc0000005 may indicate a failure after updating drivers through Windows Update. In addition, it is frequent that this process emits the code next to the message “this application could not start correctly, press OK to close the application”.

In fact, the operating system cannot load the files properly or function normally. As the application does not start, the user must close the program forcibly.

An initial option is to update the Windows PC drivers manually, but if this does not solve the problem, there are also other methods that you can use.

Solution to error code 0xc0000005 of a program in Windows 10

The error code 0xc0000005 can be solved through a set of procedures that are performed quickly and easily in order to find the cause and proceed to solve the problem.

Check the status of the RAM

Sometimes error code 0xc0000005 is caused by RAM failure In this case, you can use the memory diagnostic tool in Windows to rule out this cause.

To access the diagnostic tool, press Windows + R and type mdshed.exe . A new window will open and then you must select the option “restart now and check for problems.” If you find errors, then this would be the cause of the error code that the operating system is pointing to.

Change RAM

If the diagnostic tool detects memory failures, you will have to proceed to change the affected RAM memory module . Often times, error code 0xc0000005 is caused by a faulty RAM module that affects the operation of the system.

However, if you don’t have replacement RAM, you can remove the faulty RAM and clean its connectors. Then insert it back into the slot and see if the error appears again.

Install the previous version of the driver

Sometimes driver updates from Windows Update produce error 0xc000005. To rule out this cause, it is best to reinstall the previous version of the affected drivers.

To achieve this, go to the “control panel” and enter “Device Manager.” Afterwards, select the device and locate the “Driver” tab. There, you must check the box ” Revert the driver to a previous version “. In this way, the previous version of the driver that was updated is restored.

 

Leave a Comment