Windows 10 is prone to errors that disrupt its normal operation. For this reason, we recommend you read this article with which you will learn how to fix the BOOT BCD 0xc00000e9 error in Windows 10 easily
Index( )
- What is BCD?
- How to fix BOOT BCD error 0xc00000e9 in Windows 10 easily
What is BCD?
BCD stands for Boot Configuration Data. This is a database that works independently at the time of the startup configuration of the Windows 10 operating system .
Before the advent of Windows Vista, the Windows 7 system booted through the boot.ini file. However, in its later version, the file was renamed Boot Configuration Data and is used by Microsoft’s Windows Boot Manager .
Causes of BOOT BCD 0xc00000e9 error in Windows 10
Among the causes of the BOOT BCD 0xc00000e9 error in Windows are misconfigured registry files, failure to update drivers or system drivers, damaged storage drives (hard drives, DVD, USB), having made an improper connection or the presence of damaged cables and faulty system upgrades.
How to fix BOOT BCD error 0xc00000e9 in Windows 10 easily
As with the error 0xc0000018 when running applications , the BOOT BCD error 0xc00000e9 in Windows 10 requires first detecting the source of the failure . In this sense, it is necessary to follow a series of steps that we explain below.
Create a Windows 10 installation disc
Initially, it is essential to apply a diagnosis and restoration of the operating system . To do this, you will need a USB stick with more than 4 GB of storage capacity. With this you can create a boot disk where you will save an ISO image of the Windows 10 system.
Access the ” Update and security ” section from the “Settings” menu and click on “Recovery” that you will find on the left side of the panel. There, locate the option “Create a repair unit.” Follow the steps presented by the system wizard and you will get your installation disc.
Repair Windows system startup
Once you have created the Windows 10 installation disc, you must access the recovery options . To do this, go to the start menu and select “Settings.” In “Recovery” select the option “Repair the computer”. This option will also be found next to the installation disc after accepting the terms of use stipulated by Microsoft.
Select the option “Troubleshoot” and then ” Startup Repair .” Choose the Windows 10 system and it will immediately start the computer diagnostic process. If the tool finds errors and corrects them, you will have to restart the computer and in this way you will be able to access the system without problems.
Check the SATA connection cables
If the BOOT BCD 0xc00000e9 error in Windows 10 persists, then you should check the SATA connection cables and check if they are connected correctly. Also, make sure these items are working properly. Additionally, you can diagnose hardware problems using tools for this purpose.
Fix hard drive failures
It is possible that the presence of bad sectors is causing the BOOT BCD 0xc00000e9 error in Windows 10. If this is the cause, then you should use the system’s Check Disk tool. To do so, type cmd in the search engine and right-click on the application. Select “Run as administrator.”
Once you have entered the Windows command console, type the following: chkdsk / f / r and press the “Enter” key. Wait a few minutes while the disk check and error correction is performed. When the process is complete, restart your computer and see if the problem is corrected.
Access system restore
If the previous steps did not work, try to access a system restore point , that is, when the computer was working normally. To do this, select “Advanced Recovery Options” from the “Settings” menu and click “System Restore.”
You will see different restore points with specific dates. Choose one of them and press “scan to see affected programs”. Click “Next” and wait while the Windows restore process completes. If you can’t restore Windows , be sure to create new restore points before opting for this solution.
