How to Fix Blue Screen Error 0x000000C4 in Windows

The blue screen error, one of the most feared freezes for computers with Windows operating systems. For many, these screens mean that their computer is close to death, but it doesn’t have to be this way, every error has its cause and most have a simple solution . Today we will show you how to fix the blue screen error 0x000000C4 in Windows, but first let’s know what the causes of this failure are.

What Causes Blue Screen Error 0x000000C4?

When a computer freezes and a blue screen appears, it is usually a sign that there has been an error between the communication of the operating system and the programs that coordinate the operation of the computer’s components. That is, an error has occurred in the kernel in the operating system.

These errors cause the computer to halt immediately because the operating system cannot continue to run, and then perform a forced restart without saving the session data. However, each blue screen error has an alphanumeric code and a brief description of the failure.

These codes specifically identify the source of the error and the component that caused the failure. In the case of the blue screen error 0x000000C4, its origin lies in a failure or violation of the computer’s driver verifier or tester .

Many users have reported that this error has occurred after installing the KB4056894 update and in most cases it crashes computers with older processors. However, the cause of this blue screen error is not always due to this update, so to solve it, we propose two procedures that you can perform.

Solution 1: Update drivers

Since the blue screen error 0x000000c4 is related to the driver checker, one of the first steps you should take is to check if your drivers are up to date and in good condition . To do this, you have different options, but here we will explain how to do it through the Device Manager, remember that you must have an active internet connection.

  • Step 1: Click on the start button, in the search box type “Device Manager” and open the application.
  • Step 2: In the list you can see all the devices on your computer, check if any have an exclamation mark next to the icon. That can tell you of an outdated or faulty driver .
  • Step 3: Right click on the marked device and select the “Update driver” option. In the next window you can choose between an automatic or manual update.
  • Step 4: Choose “Search automatically for updated driver software” to have Windows search and download the correct driver.

You can perform these same steps with each of the devices and thus confirm that all the drivers are correctly installed and working well. Also, you can use other methods to update your PC’s drivers easily .

Solution 2: Uninstall update KB4056894

If after updating your computer’s drivers you still get the blue screen error, then you should uninstall the update patch that may be causing the failure. The process is a bit more complicated but here we explain it step by step.

  • Step 1: Turn on the PC and press the F8 key several times to start the system in the advanced boot options. Select “Repair Computer” and then choose “Command Prompt.”
  • Step 2: You must know the letter of the drive where Windows is installed, for this you can use the command “dir” and the letter of the drive to verify if the “Windows” folder is on the list. Example: dir C:
  • Step 3: Enter the following command to uninstall the update that is presenting the error that causes the blue screen.
    • dism / image: c: / remove-package /packagename:Package_for_RollupFix~31bf385ad364e35~amd64~~7601.24002.1.4 / norestart
  • Step 4: Wait for the process to complete and restart your computer. To prevent the failed update from being installed again, you can disable automatic Windows updates.

Hopefully those solutions have hit the nail on the head with the problem presented on your computer. There are also other blue screen errors that you can fix by following the instructions in our posts, such as registry error 0X00000051.

Leave a Comment