How To Fix All Network problems in Windows

Learn how to troubleshoot and fix all network problems in Windows with our comprehensive guide. Follow simple steps to resolve connectivity issues and stay online.

Network problems in Windows can occur on many occasions. You may have problems downloading, connecting a network drive, updating the system… In this article we show you a complete list of the main errors that can affect the network in the Microsoft operating system, why they appear and what you should do to correct the problem.

Normally you can solve all these errors simply by making some changes or adjustments, as well as taking into account certain tips that we are going to give you. The objective is to ensure that Windows connects to the Internet without problems and that there are no errors in either the Wi-Fi or the wired network.

Index

• What to do to fix download problems
  • Improve the connection
  • Keep your browser and system safe
  • Check for malware
  • Analyze the configuration
  • See if any firewalls or antivirus are interfering
  • Try removing the VPN
  • Using a download manager
• Main causes of network adapter problems
  • Disconnects from USB port
  • Firmware issues
  • Corrupt file after update
  • Malware on your computer
• Tips to avoid network adapter problems
  • Change USB port
  • Always keep the firmware updated
  • Protect the equipment
  • Check that the hardware is properly connected
  • Replace the adapter
• Why does the proxy configuration error appear?
• What to do to fix it
  • Restart router and equipment
  • Check that everything is up to date
  • Check if any software is interfering
  • Obtain IP and DNS automatically
  • Check proxy settings in Windows
  • Reset network adapter to default settings
  • Scan for possible malware
• Unexpected error in network connections
  • Steps to avoid unexpected error in network connections
    • Restart your computer and router
    • Uninstall and reinstall network drivers
    • Update drivers
    • Disable IPv6 protocol
    • Check DNS servers
    • Restore the system to a previous point
  • Failed to connect network drives
    • How to avoid the error message on network drives
  • Steps for Windows to detect the NAS server
    • Enable network discovery
    • Update the firmware of the NAS server
    • Check that Windows is up to date
    • Enable NetBIOS over TCP/IP
    • Reinstall SMBv1
  • How to fix problems opening Windows Network Center
    • Restart the system
    • Run Windows File Checker
    • Reset the network
    • Check that the firewall is not blocking it
    • Check if the device is updated correctly
    • Update the network card driver
    • Search for possible threats
    • Go to a professional
    • Fix red cross in Windows 7 Network Center
  • How to avoid internet problems after updating
    • Check that the update has finished
    • Try via Wi-Fi or cable
    • Update network card drivers
    • See if we have any security programs that interfere
    • Try the Windows Troubleshooter
    • Restart the router and device
    • Reset the network
  • What to do if network discovery is off and won’t turn on
    • Classifying networks in Windows
    • How to change from public to private network and vice versa
    • The network troubleshooter
    • Enable the necessary services to resolve network problems
    • Configure Windows Defender Firewall and advanced sharing options
    • Use network reset
  • Permissions error when modifying files in this network location
  • Fix error when assigning name and password to a network folder
    • Reset credentials
    • Do not use the option to connect using different credentials
    • Do not use different credentials to access the second resource
    • Edit the host file and list the servers
    • Use the remote server’s IP address
  • What to do when security settings are missing
    • Restart the module installation service
    • Re-register the module installation service
    • Repair Corrupted Files in Windows
    • Update the system
  • Solutions to fix the “Resolving Host” error
    • Changing DNS servers can fix this problem
    • Clear the browser’s DNS cache
    • Clear Windows DNS Cache
    • Other possible causes of this failure
  • Fix Timed Out error due to connection problem
    • Restart the router
    • Check that the Wi-Fi network is working properly
    • Change DNS servers
    • Renew DNS and IP
  • How to avoid this problem at the software level
    • Check that the browser is updated
    • Disable extensions
    • Check for adware in your browser
    • See if any firewalls or VPNs are interfering
  • «Error when RCP server is not available»
    • Restart RCP server
    • Clean boot of the computer
    • Check that the network is working properly
    • Update or reinstall network drivers
    • Configure the firewall correctly
    • Change registry settings
    • Restore the system
  • Fix NetTcpPortSharing cannot be started error on Windows
    • What error does NetTcpPortSharing cannot be started show?
    • Setting the NetTcpPortSharing service to autostart
    • Enable .NET Framework 3.5 dependency
    • Reset Winsock
    • Restore the system
  • Steps to avoid error 0x800c0006
    • Check for possible connection problems
    • Download the file to install it offline
    • Unlock the installation file
    • Check for problems with Windows Update
    • Return to a previous point in the system
  • What can cause error 0x89231806 and how to avoid it
    • Firewall related failures
    • NAT problems with the router
    • Disable VPN and Hamachi type programs
    • Check that we have the Teredo tunnel interface enabled
    • Switch to an alternate IPv6 server
  • What is error 45 and why does it occur in Windows?
    • How to know that I have an error code 45 in Windows
    • Troubleshooter and chkdsk command
    • Check that Windows is working properly
    • Update drivers to fix error code 45
    • Solution to download the driver directly from the manufacturer’s website
  • Solution to system error 67
    • Update network drivers
    • Check that Windows is properly updated
    • Reset the network
    • Check for corrupted files
    • Disable IP NAT
  • Fix .NET Framework error 0x800F0950
    • Update Windows
    • Check that there are no corrupt files
    • Install .NET Framework from Windows Features
    • Restore the system to a previous point
    • Using the .NET Framework Repair Tool
  • Errors when updating Windows
    • Steps to avoid error 0x80070659
      • Check for possible corrupted files
      • Reinstall updates
      • Improve Internet connection
      • Return to a previous restore point
      • Download updates manually
      • Give permissions to the .NET Framework 4 file
    • Avoid error 0x8007065e
      • Check that there are no corrupted files on the system
      • Run the troubleshooter
      • Check that there are no interfering programs
      • Improve Internet connection
      • Download updates manually
      • Return to a previous restore point
    • How to fix error 0x800f0990
      • Retry the installation
      • Start the troubleshooter
      • Scan for possible corrupted files
      • Install updates manually
      • Try to improve the connection speed
      • Return to a previous restore point
    • How to fix error 0x800f0905
      • Run the troubleshooter
      • Check for corrupted files
      • Restart the Windows Update process
      • Improve Internet connection
      • Restore the system to a previous point
      • Download updates manually
    • How to avoid error 0x80090011
      • Check that the connection works
      • Check the installed hardware
      • Check for possible corrupted files
      • Update network card drivers
      • Problem solver
      • Restore the system to a previous point
    • Fix error 0x8024D009
      • Scan corrupted files on the system
      • Check for previous updates
      • Check that the connection is correct
      • Pass the antivirus
      • Run the troubleshooter
      • Restore the system to a previous point
    • Error 1005
      • Why does it appear?
      • How to fix this error
    • Error 0x8007371b
      • Why does error 0x8007371b appear when updating Windows?
      • What to do to fix it
    • Error 0x800704ec
      • Why does it appear?
      • What to do to fix it

What to do to fix download problems

Let’s see what we can do to avoid problems when downloading from the Internet. We will show you some essential steps to take into account. As we have indicated, it is normal that simply changing something in the configuration or carrying out a small step will solve the problem.

Improve the connection

A very common reason for errors when downloading is that there is a problem with the connection. It often happens that we have poor wireless coverage and for this reason the speed is not sufficient to allow the download.

So, in this case, what we are going to try is to improve the connection. We can connect closer to the access point if we are connected by Wi-Fi or use some device that improves the signal, such as repeaters, Mesh systems or PLC. We can also try connecting by cable or changing the Wi-Fi band we use.

Keep your browser and system safe

Of course, it is essential to keep everything properly updated. In particular, you need to make sure that your browser has the latest version. Many times these errors when downloading from the Internet appear because you have an outdated version that is creating a conflict.

It is essential to keep the browser updated , but so is the operating system itself. It is very important to avoid vulnerabilities and correct errors. We must also check that we have an updated network card and that there are no connection failures due to it. We can go to Start, Device Manager, Network Adapters and there select the one we are interested in, right click and Update the driver .

Check for malware

Do we have any kind of malware on our system? It is often the cause of many problems. This means that we need to protect our computers properly, using security programs such as an antivirus and firewall.

To see if there is any threat, we should perform an in-depth analysis. This way, we will be able to eliminate any malware that may be affecting downloads and the functioning of the Internet on our device.

Analyze the configuration

It is very important to check the configuration correctly. Maybe we have some wrong parameter on the computer or in the browser. We already know that we can make changes to achieve an improvement in speed or certain steps that help us reduce network problems. However, sometimes we achieve the opposite and problems appear when we have changed something in the configuration.

See if any firewalls or antivirus are interfering

Security programs, such as an antivirus or a firewall , are essential to keep devices safe. We always need to have tools of this type, no matter what type of operating system or device we use. However, sometimes they can cause conflicts.

Some of these security programs may detect the download as a threat, even though it is not actually a threat. Antivirus software in particular may interpret what we are downloading, whatever type of file it is, as a virus. We can try to pause this type of software for a moment and see if the problem is solved.

Try removing the VPN

Something similar could happen if we have a VPN program installed. This type of software is increasingly used by users, as it allows them to encrypt the connection when browsing public networks and maintain privacy. They are also very useful for hiding the IP and avoiding geographic blocking.

However, we can also say that they are the cause of many network programs that we can find at the software level. It may be interfering when downloading from the Internet and that is why it crashes. We can take a look at our VPN, if we have one installed, and see if this is the source of the problem.

Using a download manager

Normally, users use the download manager integrated into the browser, where there are often problems downloading files. However, we have a wide range of possibilities. We can install an extension or an external program from which to download any type of document or file.

Therefore, another added tip is to use a download manager to see if this way we can reduce the problem of download failures. We can try multiple applications that we have at our disposal.

Main causes of network adapter problems

We are going to show you the main reasons why the Ethernet network adapter disconnects and stops working correctly. It may be due to a configuration error, but also at the hardware level. A bad placement of the card in the USB port, for example, could result in us being left without a connection.

Disconnects from USB port

This is certainly one of the most common reasons why the network adapter does not work properly, the signal is disconnected and we cannot browse. This will logically occur if we are using a card that connects to the USB port , something that is increasingly common in smaller laptops.

It should be noted that it is not always caused by the card being poorly connected. For example, if the adapter is loose and some movement causes it to move and disconnect. We must also consider that the problem may be due to the USB port itself not making a good internal connection.

Firmware issues

Of course, another very common problem is that we have some kind of problem with the adapter’s firmware . This could lead to conflicts with the operating system or it may not properly recognize the USB port to which it is connected.

However, this type of error is usually blocking. That is, it does not usually occur in small outages, but rather we will be left without a connection and have to resolve the possible conflict with the device drivers in order to be able to browse normally. It will stop working permanently until we fix it.

Corrupt file after update

Updating our equipment and systems is very important. This always helps to ensure that everything works correctly, improve performance and also avoid security problems that could compromise us.

However, sometimes these updates may cause errors. We may encounter the situation where a corrupted file occurs and, after updating, the Ethernet network card does not work properly. It is relatively common for these errors to appear after updating the operating system and to generate conflicts with the drivers.

Malware on your computer

Malware can affect the devices we use in our daily lives in many different ways. It could also damage the correct use of the Ethernet network adapter. This could lead to interruptions or even failure of the network adapter to function as it should .

It is important to keep in mind that there are many varieties of malware that can affect us. It is something that is present in all types of operating systems and devices. Whenever we have a problem, especially when it comes to network connections, we should keep this in mind.

Tips to avoid network adapter problems

We have seen what are the main causes why the Ethernet network adapter can disconnect and have problems . Now we are going to see how we can prevent this from happening or even solve it if we already have this problem present. There are different methods for this. We can take into account some changes in the configuration or also at a physical level.

Change USB port

One basic thing we can try if we are using an Ethernet network adapter that connects via USB is to change the port. Normally our computers have more than one and we have seen that one of the causes could be a bad connection or that the port itself is damaged.

So what we’re going to do is put it in a different port and check if there are still cuts or not. Also, it’s a good idea to opt for USB 3.0 ports whenever possible, as the performance will be higher and we’ll have fewer problems.

Always keep the firmware updated

Of course, it is always advisable to keep everything up to date , but even more so when it comes to devices connected to the network. Many times connectivity problems, adapter failures, come from having outdated drivers.

In the case of the Ethernet network adapter, we can update it very easily in Windows. Simply go to Start, enter Device Manager, go to Network Adapters and select the card you are interested in. Right-click and click Update driver . Then restart the computer for the changes to take effect.

Protect the equipment

We must not forget the importance of always having our equipment protected . We have already mentioned that many varieties of malware can affect the performance of the hardware we use to connect to the network and this could cause significant complications.

To protect our device we can consider using a good antivirus , but also other tools such as a firewall . The latter is capable of blocking dangerous connections and thus preventing possible intruders from accessing the equipment and damaging its proper functioning.

Check that the hardware is properly connected

This point is also basic: Is the Ethernet network adapter properly connected? We should especially look at whether it is external, since that is where we can have the most problems and with a simple movement or small knock it could stop working.

But we should also check if it is an internal card, integrated into the motherboard. We should check if there is any hardware fault and thus ensure that we can connect the Ethernet cable without problems and that the connectivity works. Sometimes it is due to a small physical error that we have made.

Replace the adapter

If all of the above has not worked, and if we know for sure that it is a fault with the network adapter, all we can do is replace it . This will allow us to solve any problems quickly.

Fortunately, there are a wide range of possibilities. If, for example, the problem is with the internal network card, it may be more advisable to buy an external adapter so that you don’t have to open the laptop, and sometimes you won’t be able to replace it without changing the motherboard.

Why does the proxy configuration error appear?

What causes the error that Windows does not detect network proxy settings to appear? If this appears, it means that something in your connection is not working properly. A very common problem is that there is a fault with the network adapter , for example, that the drivers are outdated and there is a conflict.

It could also be that there is a bad configuration in Windows . For example, you may have configured certain DNS servers and that is causing connection problems. Maybe they used to work fine, but for some reason they have stopped working correctly and that is affecting the connection.

Another simple reason is that the router or device has a specific problem. For example, in the case of the router, it may have become saturated after receiving multiple requests. If it is not a powerful and up-to-date device, it may have problems and this may lead to failures of this type that prevent you from connecting.

You should also consider the possibility that you have a program installed that is causing problems. It could even be an antivirus or firewall that you have installed to protect your computer or a VPN to encrypt the connection. They can have problems and these types of errors can appear.

What to do to fix it

So, what can you do to fix the network proxy configuration error in Windows? We are going to give you a series of guidelines that you can put into practice in a simple way in order to get the connection working normally again. These are simple steps, as you will see.

Restart router and equipment

The first and most basic thing you should do is restart your computers . This can help solve certain problems that may appear and are related to the connection. You will simply turn off both the computer and the router and turn them back on to see if the problem is solved.

In the case of the router, it is not enough to turn it off and on again; you have to keep it off for at least 30 seconds for the reset to be complete and then turn it back on. This can be very useful when the device has become saturated and complications of this type appear.

Often a simple restart is enough to fix connection problems. Like any computer, some internal process may have frozen, especially if it is not updated with a new firmware version. This can lead to more problems. This is why it may be necessary to restart it at different times. It is even advisable to do it every so often, not being necessary to do this action every week. And the same applies to the Windows computer that is being used and which is giving connection problems.

Check that everything is up to date

Keeping everything up to date is essential to be able to make the most of the available resources and also to correct any problems that may arise. This is something you should check in Windows, but also in the network adapter and drivers it uses. Everything must have the latest versions.

In the case of Windows, you have to go to Start, enter Settings and go to Windows Update . It will automatically show you any pending updates and you just have to add them. It may take more or less time, depending on your connection and the size of the updates that may be available.

On the other hand, you should also check that the drivers for the network card are not obsolete. If you use an old version, they could cause conflicts and prevent you from connecting to the Internet normally. You should go to Start, enter Device Manager, Network Adapters and there select the corresponding network card. You have to click with the second mouse button and click Update driver .

Also, if you can’t find new versions directly from this Windows tool, you can always search for a newer version manually. All you need to do is know the model of your PC’s network card and search the manufacturer’s official website . It’s possible that if your card is already out of date, it won’t receive any more updates. However, it’s worth checking if a version is available to fix any possible connection problems.

Check if any software is interfering

The next thing you should do is check if any program you have installed may be interfering and hence the proxy configuration error in Windows. You should especially check any antivirus or firewall . If you have more than one antivirus installed, these types of errors are common. Also if you use a firewall that is poorly configured or not reliable.

But this problem can also occur if you have a VPN installed . In this case, what you can do is pause it momentarily and see if the problem is solved. If so, what you should do is try connecting to another VPN that does not have this type of problem or see if you have something misconfigured that prevents the connection from working properly.

Whenever you install applications of this type, you should make sure that they are reliable. It is important that they are up to date and avoid those that you cannot confirm their origin or whether they will work correctly. You can use antiviruses such as Windows Defender, Avast or Bitdefender, as well as VPNs such as NordVPN or ExpressVPN, which work very well.

This is another of the simple points that can be checked at any time. And all because it is enough to temporarily deactivate these security tools and check if the Internet connection works normally again. So it is not a check that we will have to spend a lot of time on to get out of doubts about whether this is the problem.

Obtain IP and DNS automatically

You should also set up automatic IP address and DNS server acquisition. We usually use the ones provided by the operator itself, but we can also change the DNS and use others such as Google or Cloudflare. This is not a bad thing, as it can even make the connection work better. However, problems could arise if those DNS servers malfunction for whatever reason.

To configure it you have to go to Start, enter Settings, go to Network and Internet and then Advanced network settings. Once there you have to go to More network adapter options and select the corresponding adapter. You have to go to Properties, Internet Protocol version 4, Properties again and there you select Obtain an IP address automatically and Obtain DNS server address automatically. Accept and close the window.

Check proxy settings in Windows

Do you have something misconfigured in Windows? Maybe your proxy settings are the cause of this problem. If so, there is an easy solution. Again, go to Start, go to Settings, Network and Internet, go to Proxy and select Automatically detect settings .

If you are using Windows 11, simply search for Proxy in the search bar and click on Change proxy settings and you will be taken to the same site. Set it to automatic, reboot and see if this fixes the problem.

Reset network adapter to default settings

If all of the above has not had any positive effect, you can try resetting the network card to its default settings . This will return it to the settings prior to any changes you have made or any updates that may have caused a conflict.

To do this, go to Start, go to Settings, Network and Internet, Advanced network settings and there look for Network reset. Simply continue the process and from that moment on you will have the network settings with the default values. Restart the system and try to connect again.

Scan for possible malware

Perhaps the problem that causes the proxy configuration error to appear in Windows is due to a virus that is present in the system. For example, if you have recently installed a program that is unsafe or you have downloaded a file that could be dangerous and has affected some system component.

What you should do is use a good antivirus and scan the system . If it detects any threats, you eliminate any danger that may be there. You should make sure to use a good security application. Windows’ own antivirus may be more than valid, but you will have many alternatives as well. Since Windows 10, Defender comes already installed by default, but it is possible that it is not always the most effective and it may be necessary to resort to other antiviruses, even if they are paid. In this way we can clear up any doubts about whether a virus is the culprit behind this network failure.

In short, if you encounter the proxy configuration error in Windows, it may be due to a problem with the network drivers, system configuration or even malware that has slipped in. You can follow the steps we have explained to find the solution and be able to browse normally again.

Unexpected error in network connections

When browsing the Internet, we can encounter different errors that cause the connection to not work properly. This affects all types of operating systems, but in the case of this article we are going to focus on Windows 10. We are going to explain what we can do when the unexpected error appears in network connections . As always, we have the possibility of carrying out different actions to try to solve this failure and be able to browse normally. Before going on to explain what we should do to solve this error and prevent it from appearing again, we are going to explain the main reasons why it may be present. Basically we can say that it will occur due to a software conflict or due to problems with the Internet connection we are using.

• Problem with the connection

Connection problems are usually related to the router or network card we are using. Perhaps there has been an internal problem with one of these devices and it is affecting the proper functioning of the connection. This is something we must take into account and take action to solve it. We can say that two very important points for a connection to work properly are the router and the network cards we use. It does not matter if we are using a wired or wireless connection, since this problem could occur in both cases.

• There is a conflict at the software level

This usually happens if we are using outdated network drivers , we have recently updated the operating system and it can lead to conflict or even misconfiguration. An example could also be using the IPv6 network protocol. This could be creating failures at the software level. Therefore, whenever we encounter the unexpected error in network connections, we need to keep in mind that maybe it is some error with the drivers or with the software we are using. We need to carry out some actions, as we are going to explain below.

Steps to avoid unexpected error in network connections

There are many errors that can arise when using Windows and sometimes these failures are related to connections. One of them is when an unexpected error appears in network connections . It does not allow us to browse normally and we have to take some actions to try to solve it. We already know that it is the most used operating system on desktop computers, so it can affect many users. But whenever a failure of this type appears we must know what to do. We are going to explain different types of actions that we can do to try to solve the failure. The objective will be for the Internet connection to work correctly and we can browse normally. There are different points that we must take into account to achieve this.

Restart your computer and router

One basic thing we should keep in mind is to restart the computer and also the router . This may not solve the problem, but it is a first piece of advice we can follow. Sometimes these types of errors are solved with something as simple as turning our device off and on again.

In the case of the router, it must be restarted correctly. We must turn it off and keep it off for at least 30 seconds. At that point we can turn it back on. This way the restart will be complete. After all, the router is a fundamental part of our connections and sometimes this type of problem can be solved this way. When it has to resolve multiple requests, something that happens if we have many devices connected, it could lead to failures of this type.

Uninstall and reinstall network drivers

One of the most effective solutions is to uninstall and reinstall the network drivers . This way we can solve this problem that affects Windows 10 users. It is common that this type of error can be solved by correctly reinstalling the network card drivers. To do this, go to Start, type Device Manager and then go to Network Adapters . There, all the options that our computer has will appear. We simply have to choose the one for our device and click on Uninstall the device. It can be the Ethernet network card or also the wireless one.

Once we have done this, what we have to do is go to Action and click on Scan for hardware changes. What the system will do is add the drivers for this device again. One way to do this is to reinstall them and see if this solves this problem.

Update drivers

We can do something similar when updating drivers. We can do this with network devices that are causing problems. We go back to Start, enter Device Manager and access Network Adapters . On this occasion we have to right-click on the name and click Update driver. This way we make sure we have the latest version installed. Sometimes when updating Windows there may be problems that affect other drivers. They may not recognize the previous version, for example. That is why it is always important to have the latest available versions updated. In addition, this way we will have the latest updates available to improve performance, beyond correcting security problems that may arise. It is important to achieve maximum speed and stability, whether we connect by cable or Wi-Fi.

Disable IPv6 protocol

Some users indicate that one way to fix the unexpected error in network connections is to disable the IPv6 protocol . We can do this by following a few simple steps that we are going to explain. The first thing is to go once again to Start and type Control Panel. Then we go to Network and Internet and go to Network and Sharing Center. Here we go to Change adapter settings. In the adapter that interests us, we click on it with the second button and click on Properties.

We just need to uncheck Internet Protocol Version 6 and click OK. This will fix this problem.

Check DNS servers

Another possible solution is to check the DNS servers. To do this, go to the Control Panel, go to Network and Internet and select Network and Sharing Center. Go to Change network adapter and right-click on the network adapter. Then go to Properties and double-click on Internet Protocol IPv4. There we can change the DNS and check if that could be the problem causing this error. Normally we use the ones offered by the Internet operator we have contracted, but we can use different ones such as those from Cloudflare, Google, etc. In this way, on many occasions we can even improve the speed.

Restore the system to a previous point

Have we recently installed something that could have caused a bad configuration or even corrupted files? Another option we can do is to restore the system to a previous point. For example, if we have performed a major update and it has generated some kind of problem. Also if we have installed a program. It is an option that is available in Windows 10 and we can easily use it. In Windows we have to go to Start, enter Settings, Update and security and there restore the system to a previous point or reset it to the factory settings. This will undoubtedly solve many problems of this type that can lead to errors in navigation or when using any program.

Failed to connect network drives

This is a message that can appear in Windows , the most widely used operating system on desktop computers, when we start it and it does not recognize a network drive or for some reason it cannot reconnect it. It is usually a disk, for example, that it tries to mount and is not available at that moment. This could affect the performance of the computer and even when using some programs that may be installed there. Hence, it launches this alert.

It is very common, for example, if we have a NAS server installed. We use it as an additional drive to save files and it acts as if it were another hard drive. However, if it is disconnected or if there is an error, the operating system would send us a message saying that all the network drives could not be connected. This alerts us that there is something wrong and so we can take action.

Normally, the operating system has mapped that drive . So, automatically, every time we start it, it will recognize it and it will be available. However, there could be very varied problems that prevent the system from being able to use that drive at a given time. It could even happen that we voluntarily have it turned off.

What can we do to stop this message from appearing? If we go back to the example we gave, it could happen that we don’t want the NAS server to be always on. We simply decide to connect it when we are going to use it and the rest of the time we have it off. But of course, Windows will try to connect it automatically. If it is off, it will display a message indicating that all the network drives could not be connected. Luckily, this is easy to remove.

How to avoid the error message on network drives

Preventing this annoying message from appearing in Windows 10 is very simple. We may not want this information to appear every time we start the computer and we don’t have the NAS server connected, for example.

To do this, we are going to use the Windows Registry . We can access it through different methods, but the easiest is to simply press the Windows+R key combination and type regedit . We can also go to Start and type it there and open it. This is the Registry Editor, from where we can make some changes to the operating system.

Once we are here, we have to go to the path ComputerHKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlNetworkProvider. We simply have to navigate from the left panel until we get to that point.

Once we are here we are going to create a new registry value. To do this, click on NetworkProvider with the second mouse button, click New and then DWORD Value (32 bits).

The name we need to give to this record we are creating is RestoreConnection . We do not need to give it any value other than the one provided (0). If we double-click on it we can verify that it is correctly configured, as shown in the image below.

And there is nothing else to do. We just have to close the Windows Registry and that’s it. If we restart the computer, we will see that this message no longer appears. It will no longer indicate that all network drives could not be connected .

If at any time we want to reverse the situation and be alerted again, we simply have to follow the steps again. As we do with any change in the Windows Registry, we would have to go back to the exact path and delete the record we created.

A dialog box will appear as we can see in the image above and we just have to accept. This record will be automatically deleted and everything will return to the previous state. We can restart the computer and we will see that the changes have taken effect.

Steps for Windows to detect the NAS server

The problem arises when our operating system, Windows in this case, does not detect the NAS server . We have it connected, we know it works because we have tested it before or on another computer, but we cannot get it to work correctly on this device. This is something that can happen on certain occasions and we can solve it without too many complications, unless there is a physical failure or a problem with the system.

Enable network discovery

One of the reasons why we may have problems detecting a NAS server or any similar device is that we do not have network detection activated in Windows . This is a simple process that we can carry out and that serves to make a computer connected to the same network visible.

To activate network discovery in Windows we have to go to Start, type Control Panel and access it, go to Network and Internet and click on Change advanced sharing settings. There we will find the Network Discovery section, which we must make sure is activated. If it is not, we must activate it and click on Save Changes.

Update the firmware of the NAS server

One very important thing to keep in mind is that we must have the latest version of the NAS server firmware. This is undoubtedly one of the most common reasons for it not working properly. This may be due to a conflict with the operating system after a Windows update, for example.

It is essential to have the latest version of the firmware for it to be detected correctly. To do this, we will have to access the control panel of the device and look for a more recent version that we can add. This will also be essential to achieve the best possible performance, as well as to correct possible security breaches that can be exploited by hackers.

Check that Windows is up to date

It is also important that Windows is properly updated and not just the device. There could be software conflicts that affect the recognition of the NAS server. For example, if we have the NAS updated but we use an old version of Windows that does not have a necessary component.

Therefore, we must always make sure that we are using the latest version of the Microsoft operating system. To do this, simply go to Start, enter Settings, go to Update and security and check which version we are using and, if there is a higher one, install it.

Enable NetBIOS over TCP/IP

Another setting we can take into account in Windows if the system does not detect the NAS server we have installed is to enable NetBIOS via TCP/IP if it is not already enabled. It is a quick process and can be very useful in these cases.

What we are going to do is go to Start, enter Settings, go to Network and Internet, click on Change adapter options and, once inside, select the network card we are interested in. Right-click on it and go to Properties.

Now we have to check Internet Protocol Version 4 (TCP/IPv4) and, once again, Properties. Then we click on Advanced Options and a new window will open, which is the one we are interested in to solve this error.

In this new window we have to click on the WINS tab and check the option Enable NetBIOS over TCP/IP, which we can see below.

It should be noted that this process will have to be carried out on each of the network cards that we use to connect to the NAS. That is, if for example we have an Ethernet network card and a Wi-Fi card, we would have to do it in both cases.

Reinstall SMBv1

Another option we have in case the problem of our computer not recognizing the NAS server appears is to reinstall SMBv1. However, it must be taken into account that Windows does not recommend this. This is because it has had different security problems that have been exploited by hackers.

Reinstalling SMBv1 on Windows is very simple. You just have to follow a series of steps that we will show you. Once done, we will be able to see whether or not the Microsoft operating system recognizes the NAS server that we have on our network.

The first thing we are going to do is go to Start, look for Control Panel and access Programs. Once here, we must click on the option Activate or deactivate Windows features. A series of operating system features will appear and we have to look for the one that says Support for the SMB 1.0 file sharing protocol .

We have to check the box and accept. Once this is done, we have to restart the computer and we can check if it has really had any effect or not on our problem.

How to fix problems opening Windows Network Center

We are going to show you some options to try to solve problems when opening the Windows Network Center. Some of them are basic and can be used generally to try to solve this type of problem.

Restart the system

Without a doubt, something basic that solves simple problems on many occasions is to restart the computer . This can solve problems when starting processes that may have been stuck, for example. It may happen that the computer has become saturated, that we have a large number of processes open and that this is blocking the ability to open this system function.

Therefore, a first step to try to open the Windows Network and Sharing Center when it gives problems is to restart the computer. Then, once we have started it again, we try to see if it opens correctly. If it is a simple error, without affecting the configuration, it will normally be solved.

Run Windows File Checker

In case that first step does not work, we can run the Windows File Checker . This can solve many problems of this type, such as when we cannot enter Windows Settings.

To do this, we have to go to Start, type CMD and run it in administrator mode. Then we type sfc /scannow and start the scan. This could solve some problems that cause errors of this type. It is used to correct possible corrupt files in the system. The process may take a few minutes, depending on the type of system. For the changes to take effect, the computer must be restarted.

Reset the network

Another thing we can consider is resetting the network . It could also help to access the Windows 10 Network Center without problems. In this case, we go back to Start and enter Settings. Then we go to Network and Internet and there we will find, at the bottom, the Network reset option.

What this function will do is reset all the network adapters that we have on the computer, whether Ethernet or Wi-Fi, and return them to the default values. It is a useful feature that can help us if, for example, we have updated Windows and there has been a conflict with the network card drivers. What it does is uninstall them and reinstall them again.

When we click on this option, all the network adapters in our operating system will be removed and reinstalled, which will restore the base or initial configuration. But we must bear in mind that this will force us to redo all the configurations we had applied to the system. We are not talking about something too complicated, so you can try it out without any problems.

Check that the firewall is not blocking it

Security tools are very useful to keep our computers working properly. Having a good antivirus or firewall is essential to protect ourselves on the network. However, sometimes a bad configuration or using an inappropriate program can also cause problems. For example, if we use a trial firewall, a free version or one that does not comply with what should be a good performance.

One thing we can do if we can’t access the Windows Network and Sharing Center is to make sure that the firewall we have installed, such as Microsoft’s own, is not preventing us from opening that application. We can always pause it momentarily and see if that solves the problem.

If we want to test it, we can temporarily disable it to see if the fault is in this section. To do this we can do it in two ways, either through the Windows graphical interface or through the command line with CMD.

To do this, we will go to the command line and type netsh advfirewall set allprofiles state off , with this we will leave the firewalls deactivated. To reactivate them, we will write the same thing, but with an on instead of off .

Check if the device is updated correctly

It is very important to keep all systems and devices updated with the most recent versions. This is something that we must apply to both operating systems and all the applications we use. This allows us to keep the equipment in good condition and to be able to solve possible problems.

Sometimes even a recent update has been left halfway and generated errors. Therefore, we must make sure that our equipment is correctly updated to avoid problems. In Windows, we will have to go to Start, enter Settings and there we will find the Update and security option. It will automatically start looking for new versions and, if there is something to install, it will add it.

Update the network card driver

We should also check that we have the updated network card driver . This could be the cause of a software conflict if we have an outdated version. To update it we have to go to Start, type Device Manager, go to Network Adapters and there we select the one we are interested in. It could be the Ethernet or Wi-Fi card.

Once here, you have to right-click and select Update driver. It is advisable to do this process on all the network adapters you have. Sometimes we have several wireless adapters and one of them could be outdated and generate some kind of failure.

If we see that Windows does not find any update for the driver in question, we can always go to the manufacturer’s website and download the latest network adapter driver there. To do this, we will have to search for the exact model. In this step, since we do not have access to the Internet, we would have to use another PC and save the download on a pen drive to transfer it to the PC we want to recover.

Search for possible threats

There are many malware threats that can compromise our computers. This could also mean that we cannot open certain programs and functions. Therefore, we must ensure that the system is clean and that there is no virus causing failures. For example, it could be a virus that we have downloaded without realizing it through an email or by installing a program that contains malicious software. This will often damage the system configuration.

Having a good antivirus can help prevent these types of problems. We should always have tools that protect us, regardless of the type of system or device we are using. Windows Defender would be a good option in the case of Windows, but we can also use other independent programs such as Avast, Bitdefender, Kaspersky…

Go to a professional

If we run out of options and still can’t find the problem, it is always advisable to go to a professional. And for that we don’t have to go empty-handed either. If we open CMD, always running it in administrator mode, we can use some commands to get a report that will be of great help to the professionals who can help us.

Once we are inside the command line, we will write the following, netsh wlan show wlanreport . This will generate a network report that will provide very valuable data. This will be done in HTML format, which we can write in a browser.

In short, these are some options that we can take into account when there are problems accessing the Windows Network and Sharing Center. There are different causes that can lead to this problem, so we will also have several possible solutions to make everything work correctly.

Fix red cross in Windows 7 Network Center

This error is not a hardware failure, that is, it is not a failure of your computer, your WiFi or wired network card, or your router or WiFi access point. The error is due to a failure in the connection manager of our Windows 7 operating system. Initially, the problem was believed to be caused by an update installed at the end of August, but after uninstalling all the updates it was found that this was not the case and that it was a small bug. The origin of this bug is found when a change occurs in a hardware profile, related to a network adapter. Therefore, it is a bug or failure in the operating system itself, and it is not a hardware problem or something we have done wrong.

At first it was thought that it could be due to some bridge connection that might have been configured, but after having eliminated them we found that the problem persisted. So, looking back a little, we remember that in the last few days I had tried the Alfa Network USB adapter and that I had installed and uninstalled the driver, which made me suspect that the problem was that when modifying the hardware profiles of some network connection, in this case, uninstalling it, the operating system, more specifically the network connection manager, thinks that there is no network interface and therefore, places the disconnected icon in the taskbar.

Leaving aside the fact that there are times when this also happens and it is solved by turning off the wireless network and turning it back on, we are going to give you the solution on how to solve this problem.

This is the problem we are faced with:

As you can see by accessing the Network and Sharing Center, you can see that there is a bit of inconsistency between the data. On the one hand, it detects that the computer is connected to a wireless network, but in the overall scheme, there is no wireless connectivity.

To fix this error in Windows 7 that is caused by a bug or failure in the operating system, the first thing we have to do is go to the “Network and Sharing Center” section in “Control Panel”, here we will have to go to the “Wireless network connection (your network)” section, then a screen will appear and we must click on the “Properties” button, as you can see in this photo:

Once you reach this screen, click on the Configure button which will take you to the wireless adapter configuration window, as you can see in the following photograph.

Let’s go to the Driver tab . Once there, we will have to Uninstall the device. You might think that updating the driver would be enough. But as we know, the connection manager does not detect any card, so updating the card is not enough. We have to make it detect it again. So we proceed to uninstall it.

This process is well known in Windows, if a wired or WiFi network card does not work properly, it is best to uninstall the device and wait for the operating system to recognize it again, to reset all previously made connections and start from scratch.

Once we have clicked on “Uninstall”, what we will have to do is exit the screen and it will ask us to restart the operating system (computer), click on accept and the computer will restart to apply the changes correctly. Also, once restarted, we can go to the “Start / Computer” section and right-click with the mouse on “Properties”:

In this screen we will go back to the Windows “Device Manager” section, in order to see the driver of the WiFi card that has caused problems again. This option is located in the upper left half of the screen.

Once we are in the “Device Manager” section, we will have to reinstall the card that we have uninstalled. It is not complicated at all, the only thing we have to do is click on “Search for hardware changes” and it will automatically detect the wired or wireless network card that you have previously uninstalled. This step is very important to correctly reinstall the wired or wireless card.

You will then see a notification in the taskbar that new hardware has been detected, this new hardware should be your wired or wireless WiFi network card. If another device appears, this means that you have inserted another card or peripheral and Windows has not detected it before, and is detecting it now for some strange reason.

You may have to wait a bit, and it may even ask you to reboot your computer for the installation to finish, but after the installation is complete your connection manager will be consistent and working again.

Sometimes, we may also see the red cross appear but at the same time we can be connected to the Internet, and we have even seen how in the same connections window it tells us that we are connected to a network and at the same time that we are not, things that seem quite strange, if this is your case, and it turns out that you have tried the instructions that we have indicated above and they have not worked for you, do not worry, for this type of problem, we always have slightly more drastic solutions such as editing the Windows registry file itself so that this stops happening to us.

You may be wondering why we are going to edit the registry, and the reason is that it is very likely that the problem is caused by some change made to our computer that Windows could not register or update correctly and this will cause the status icon of our network to remain buggy and will be displayed either in an incorrect state or to remain permanently in the last registered state.

The instructions we must follow in this case are the following:

• We click Start, [then click Run], type regedit and then press ENTER.
• We need to find and then click on the following registry subkey:
  HKEY_LOCAL-MACHINESYSTEMCurrentControlSetControlNetwork
• We then right-click on this subkey, click Export, and then save the selected branch to a file.
• We click on the Network subkey again and then we will delete the Configuration entry. Do not delete the >Network subkey, the configuration entry will be rebuilt when we restart the computer again.
• Now we restart the computer, in some cases after modifying a registry, we may need to manually turn off the computer using the button.
• The setup key will be recreated on next boot.

As you have seen, solving the red cross problem in the Windows 7 operating system is really simple, basically what we will have to do is uninstall the WiFi or wired network card that we are using, restart, and reinstall it automatically in Windows 7 in order to solve this problem and connect correctly to the wired or WiFi network in our home.

How to avoid internet problems after updating

When problems of this type arise, we can take into account some essential tips. Sometimes, after an update, similar errors can appear, which can leave us without Internet or without being able to use certain programs.

Check that the update has finished

This is a basic thing, but we must check that the update has been carried out correctly. It is not unusual for the process to be paralyzed for some reason, whether it is a momentary interruption of the Internet signal, a corrupted file, a problem with the system when trying to install a component…

Therefore, we must check that the update has finished. To do this we have to go to Start, enter Settings, click on Update and security and we will see if we have the latest version correctly installed or if on the contrary there is something pending and we must finish it.

Try via Wi-Fi or cable

Are we having problems only with Wi-Fi or cable? The best way to find out is to connect using another method. Let’s say we’ve always used cable but now, after installing the Windows update, the Internet doesn’t work. We can try connecting via Wi-Fi and see if it works normally. It’s possible that the error only affects one of the network cards we have installed.

Update network card drivers

Another essential step is to update the drivers for the network card. Installing the latest version of Windows could result in software conflicts with the drivers on our computer. It may happen that the versions are not compatible and we need to update them.

The process is very simple. We have to go to Start, open the Device Manager, go to Network Adapters, choose the card we are interested in and right-click on it to then click Update driver . We will then have to restart the computer and check if it works properly.

See if we have any security programs that interfere

Security programs are very important and we should always have them. Having a good antivirus can protect us from the entry of many types of malware. However, when updating Windows, the integrated antivirus itself may conflict with another third-party tool that we have, such as a firewall.

This fact could leave us without Internet. We should check if when updating the system there has been a problem with the antivirus or any security program that we have installed. We should update them or, if necessary, pause them momentarily and see if we can connect normally.

Try the Windows Troubleshooter

One more tip we can give to troubleshoot Internet connection issues after a Windows update is to use the troubleshooter. It can detect and fix any errors that may occur, conflicts with network components, and any complications that may appear.

We have to go to Start, enter Settings, go to Network and Internet and there we will see the Windows troubleshooter option. Click on it and it will automatically start detecting problems and making a diagnosis so we can solve them.

Restart the router and device

This question is also basic, but it can be very useful. Perhaps there has been a conflict with the DNS, IP or a failure in the management of the Internet by the router. The same could happen at the device level.

For this reason, we must restart both the router and our computer. However, in the first case, we must restart it correctly. It is not enough to turn it off and then turn it back on immediately; we must leave it off for at least 30 seconds and then turn it back on for the restart to be effective. After this, we can check if the connection works correctly.

Reset the network

Another option we can consider is to reset the network. This will remove and reinstall all network adapters. It can fix conflicts caused by the last Windows update and hence the Internet problems.

We have to go to Start, go to Settings, Network and Internet and there we click on Network reset . We have to continue the process and then restart the computer so that the changes have taken effect correctly.

What to do if network discovery is off and won’t turn on

When we work on the same network in Windows 10 as others, we have the possibility to share files and printers with other connected devices. However, when we try to share our network, our PC might display the message that network discovery is turned off . In this tutorial we are going to explain how to solve the problem and explain how Windows classifies networks to work with. In case you don’t know, it classifies different networks between public and private. We will also teach you how to switch between them.

Working with Windows is usually easy, as most error messages give you a clue as to the source of the problem. Starting from the error message “network discovery is turned off” you will face these problems:

• The PC cannot browse the Internet.
• The computer cannot connect to the local network to share files and printers.

If you have this problem, enabling network discovery manually will solve it most of the time. In this tutorial, we will show you how to do it, unblock the firewall in case that is the cause, and other settings to make everything work perfectly for you.

Classifying networks in Windows

When we choose a network configuration for a computer, it is configured with certain security and firewall parameters depending on the type of network we choose. If we talk about Windows 10, we can say that we have two types of networks:

• Private
• Public

Private networks are the most recommended for our domestic and trusted environment (office where we work). In this type of network, Windows enables network discovery functions by default. Thanks to this, the rest of the PCs can see our Windows computer on our local network. In this way, it is possible to exchange files on the network and, for example, share a folder with files so that the rest of the computers connected to our LAN can see it. In this sense, checking that we have a private network is one of the first things we have to check when we cannot share files.

On the other hand, we have public networks , in which we disable the visibility of our PC on the network. It is understood that these are networks in which our security can be compromised with computers belonging to unknown people. A typical example where we should choose this type of network is when we connect to a public WiFi network such as that of a cafe with our laptop. In this way, the rest of the computers will not consider them to be part of our network and files will not be shared.

How to change from public to private network and vice versa

If we want to change the network type in Windows 10 we must follow these steps:

1. Let’s go to the start menu .
2. We select settings (wheel icon).
3. We click on Network and Internet .

Next, we select Ethernet and a screen like this will appear:

In this case, I have selected Ethernet, because my PC is connected to the router via a network cable. If you were connected wirelessly, then you should select Wi-Fi. Then click on the “Network Connected” icon in a red box on the right.

Here we can switch between public and private by selecting the appropriate option. A typical failure that prevents us from sharing files on our local network is because we have it configured as a public network.

The network troubleshooter

One of the first things to try when network discovery is turned off is to use the network troubleshooter. To do this, go to the taskbar, right-click on your mouse, and select Troubleshooter .

Next, a screen like this will appear:

Here we will select I have another problem and we will follow the instructions on the screen.

Enable the necessary services to resolve network problems

Another reason why network detection is turned off is because one of the services for its execution is not in use. Now we will follow the following steps:

1. We go to the start menu .
2. We write Run .
3. To open, type services.msc and click OK.

The next step we are going to take is to look for the UPnP Host Device service and select it with the right button, properties.

Here we have to take three steps:

1. Startup type: Automatic .
2. We will click on Start .
3. We will finish by clicking on Accept .

Next, we will need to repeat the same process for three more services. The first is the Feature Discovery Resource Publishing service .

The second is the SSDP Detection service .

The third and last one we must activate is the DNS Client .

Once we have finished applying all the changes we must restart our PC and check if the changes have taken effect.

Configure Windows Defender Firewall and advanced sharing options

Another reason why network detection may be turned off is related to the way we have configured the Windows Defender Firewall. Let’s start by going to the Start Menu , typing Windows Defender Firewall and clicking on it.

Then we need to select Allow an app or feature through Windows Defender Firewall .

Then we press the Change settings button , look for Network discovery and check the private and public network boxes. Finally, we finish by clicking on OK .

With this we have finished with the firewall, now it is time for the advanced sharing options. To do this we will follow these steps:

1. We go to the start menu .
2. Let’s go to Control Panel .
3. Network and Internet .
4. Click View network status and tasks .
5. Click on Change advanced sharing settings .

Then we will get a screen like this:

Here we select Enable network discovery and Enable automatic configuration of devices connected to the network .

This would be another way to fix problems when network discovery is turned off. As you can see, in this tutorial we are showing multiple solutions so you can fix it.

Use network reset

In this case we could say that it would be our last resort when the previous solutions have not yielded results. Using the network reset, we will solve our problem, but in exchange, it has some drawbacks, since we will have to configure the Windows network section again.

Now we are going to follow the following steps:

1. Let’s go to the start menu .
2. We select settings (wheel icon).
3. We click on Network and Internet .
4. We head to the State section.

Next, we will see a screen like this:

Then we click on the Network reset  section and these options will appear:

Here we are being warned that if we have VPN client software or virtual switches, we will need to reconfigure it. Performing a network reset will reinstall all our network adapters and restore the network components to their original settings and default values. Another thing we will need to reconfigure is Windows TCP/IP if we had a fixed local IP assigned or DNS servers set. If we want to proceed with the network reset, we will click on Reset Now and our computer will restart. Finally, by applying all these tips we will be able to solve the problem of “network discovery is off” in Windows.

Permissions error when modifying files in this network location

On many occasions, Windows 10 users encounter the permissions error when they are going to modify a file in a network location. They get an alert message that something is wrong and that action cannot be carried out. This occurs when trying to save or modify a file.

The message we get is “You do not have permission to modify files in this network location. Check with your administrator.”

As you can imagine, this means that you don’t have the necessary permissions to modify files that are in those network locations. This could be because the corresponding administrator hasn’t granted you the necessary permissions to do so. However, it’s also possible that this happens on your own device, due to some configuration error you made.

We are going to explain what we can do to avoid the permissions error when modifying files in this network location, whether we are home users or administrators and we want to grant someone permissions.

To do this, we have to right-click on the document we want to modify or on the network drive for which we do not have the necessary permissions to modify. Then we have to go to Properties and go to the Security tab .

In Group or user names we have to look for ours, the one that corresponds to the problem, we select it and click Edit. There we will see a list with the different permissions that may be denied, such as reading or writing. We simply have to make sure that no option that could harm us is checked and if there is one checked, we uncheck it. Then we click Apply and Accept.

We can also select the specific user and click on Advanced Options and edit the different parameters from there.

Once we have done all this, we can return to those files or folders where we had permission problems to modify them. We can check if this way the error has been fixed and we can have control over that network location.

Please note that we may need to perform these steps on other users that may be on that system. This will depend on whether our computer has several accounts and whether this problem appeared on all of them.

Fix error when assigning name and password to a network folder

We are going to show you a series of tips that we can put into practice in a simple way. These are steps that we can easily follow to solve this error that is relatively common when trying to map network drives in Windows. Some alternatives that we can use to prevent this error from appearing in the Microsoft operating system.

Reset credentials

To avoid this problem, a first step we can take is to reset the credentials. To do this we have to press the Windows + R key combination and run services.msc and then go to Credential Manager .

Once we are on the Credential Manager we have to right-click on the name and click Restart . After doing this we restart the computer and check again if the error is solved. It is a simple process and we simply have to mark what we see in the image to reset the access credentials. This could also be useful to solve other similar problems that could be present.

If this is the reason for this problem, we could see that after restarting the computer it starts normally and we do not have any errors. We already know that restarting the computer can also solve many small errors that may be present.

Do not use the option to connect using different credentials

We may have checked the option to connect using different credentials while we were mapping the second drive. This could have caused this issue, so it would not be necessary to check that option.

Therefore, the first step we can take is simply to uncheck the option to connect using different credentials and then click on assign the network drive. In this way we could solve this problem that may appear in Windows. We will have to do what we see in the image.

Do not use different credentials to access the second resource

Another reason could be that we are using different credentials to connect to the second share. This could cause this failure. This is because Windows does not allow assigning different credentials to access the same server.

What we can do is create a different name, a DNS alias for the remote server and then a different one to connect to the network share. This should solve the problem and allow us to connect normally.

Edit the host file and list the servers

Another alternative, which is directly linked to the previous one, is to edit the host file and list the servers there. This way we can use aliases and we will not have this error. We can also use the IP address of the remote server when trying to connect to that network share.

Therefore, in this way we can use different user credentials to connect to the network share. This way we will avoid this error that could be present in Windows 10 and not allow us to connect normally. It is another alternative that we can take into account.

Use the remote server’s IP address

We can also consider the possibility of using the remote server’s IP address when trying to connect to that network share. This is another option that we can take into account and that can help us solve this problem.

In short, by following these steps we mentioned we can solve the problem that appears when we try to connect to a network share and we get the message the specified network folder is currently assigned a different name and password in Windows.

What to do when security settings are missing

Windows is still the most widely used operating system on desktop computers today. This means that when we encounter a failure of this type, it can affect many users. This time we are talking about a failure that could occur after performing a system update. We run the troubleshooter and it gives us a message indicating that security settings are missing or have been changed. There may be corrupt files that have not been installed correctly.

There may be several reasons for this problem . We mentioned that it could occur after updating the system, but it could also be due to other reasons. It could be a problem with the Windows Modules Installation Service, corrupted Windows files, disk space, etc.

Generally, the fault will be at the software level. It will be closely related to something you have installed or to a Windows component. These are errors that you can easily fix and get the system working properly. It is important that the computer is protected and that a problem of this type does not put it at risk.

As is often the case, when we encounter this type of problem in Windows we can take a variety of measures. We are going to list some of the possible solutions to avoid the message that indicates that security settings are missing. Mainly you should focus on keeping everything updated, checking for possible corrupt files and the modules installation service.

Restart the module installation service

We have seen that one of the causes of this problem may be due to the module installation service. Therefore, one of the solutions we propose is to restart this service . In this way, we can solve certain problems that may arise in a simple and fast way.

To do this, right-click on the Windows bar and go to Task Manager. Then, go to the Services tab. There, look for Windows Installer Service or TrusedInstaller in the list. When you have it, right-click and click Stop and then Start.

Re-register the module installation service

If the previous step does not work, we can re-register the module installation service. To do this, go to Start, open CMD and then run two commands. Keep in mind that we have commands for both the 32-bit and 64-bit versions.

The commands we must execute are the following. The first one is used to remove the registry and then to register it again:

%windir%system32msiexec.exe /unregister

%windir%system32msiexec.exe /regserver

%windir%syswow64msiexec.exe /unregister

%windir%syswow64msiexec.exe /regserver

Repair Corrupted Files in Windows

A third solution is to repair any corrupted files in Windows. We already know that this could lead to a wide variety of errors that could damage its proper functioning. We can take this into account when solving certain problems. If, for example, you have recently updated your computer or installed a program that may have caused problems, this is something you should do.

To do this, we have to go back to Start, open the Command Prompt again and run DISM.exe /Online /Cleanup-image /Restorehealth. A process that can take a few minutes will automatically begin. This will depend on the number of files that need to be reviewed and the capacity of the system. However, it is a process that will not take too long.

Update the system

One last solution is to simply keep your system up to date . This type of error may appear after an update that has not been completed correctly or has failed somewhere along the way. This could lead to some bugs that throw up messages like the one we mentioned about security settings not appearing.

To update Windows you have to go to Start, go to Settings, Update and security and, there, click on Update computer. You will see any pending files to install, as well as the version you have installed. If you see that there is something pending, simply click on install everything and make sure that the process completes correctly. You can also click on the Check for updates button and perform a manual search.

We should always make sure that we have the latest versions. Only then can we deal with potential security vulnerabilities that could be exploited by hackers to carry out their attacks. It will also help us to have the latest performance improvements so that the system works as well as possible.

Our advice is to periodically check that the latest versions are installed on the system. The same applies to any program you have installed on your computer, any service you use, drivers, etc. Precisely the latter, the drivers for the network card, should also be updated. In this case, you have to go to Start, enter Device Manager, click on Network Adapters and select the corresponding network card, either Ethernet or Wi-Fi. Click with the second mouse button and click on Update driver . Once this is done, you will have to restart the system for the changes to be carried out correctly.

Solutions to fix the “Resolving Host” error

This error is closely related to the DNS servers we use when browsing the Internet continuously, therefore, we must try different methods to check if the DNS servers on each and every one of our devices are correct, or if we are using a DNS server that is not working properly. We will also check if the browser or the operating system is to blame, because DNS responses are cached for a certain amount of time, but the latter can be easily solved by deleting this cache.

Changing DNS servers can fix this problem

This error, as we have already mentioned, is closely related to errors related to DNS servers. Therefore, one of the simplest and most effective ways to solve the “Resolving Host” error is to change the DNS servers that we have assigned to our Windows computer. However, before starting to do anything, it is advisable to reflect a little on our current situation. Here we should consider when the problem started, whether it is temporary or not and whether it also affects all programs or some in particular.

A typical example in terms of software, may be that we are using a slow VPN and occasionally have problems of that type. Generally, the main Internet providers or ISPs in their routers set their own DNS. These are not always the best and, in addition, our ISP will know our browsing history easily and quickly. If we have not manually configured the DNS servers, our computer will receive the IP from the router through the DHCP protocol, and will be using said servers.

Then we would have two options. One would be to access the router configuration via the web and change the DNS , if it allows us to do so. This would be an example.

Remember that you have to be very careful with this, because it will affect all devices, both those connected by Ethernet cable and by Wi-Fi, except those with a manual configuration.

The second option we would have would be to change the TCP/IP DNS , in Windows 10 it would be:

• Start Menu.
• We will write Configuration and press Enter.
• Network and Internet . There we choose Ethernet if we are connected by network cable or Wi-Fi if our connection is wireless.
• Change  adapter options . There we look for ours and right-click on Properties .

Then we would see a screen like this:

Most commonly we are using an IPv4 connection, but if we are using IPv6 we can also try to connect through the IPv4 protocol to rule out routing problems, this is done by disabling the IPv6 protocol in the previous menu and clicking on accept. If we click on Internet Protocol version 4 and the Properties button , then we would have to configure it like this:

Here we need to set the preferred and alternate DNS. This would be an example using Google DNS servers.

Some quality DNS that we can use are:

• Google  – 8.8.8.8 and 8.8.4.4
• Cloudflare  – 1.1.1.1 and 1.0.0.1
• IBM (Quad9)  – 9.9.9.9 and 149.112.112.112

We could also use a program like DNS Jumper to choose our DNS, which allows us to check its operation and choose the one that interests us most.

Clear the browser’s DNS cache

Other common causes of the “Resolving Host” error are that the browser’s DNS cache contains information that is outdated and is causing problems. While most of the time it speeds up connections, on rare occasions it can be a source of conflict and simply clearing the DNS cache can fix it. If we want to clear the DNS cache in Google Chrome, we will open the browser, and in the address bar we will write the following and press enter:

chrome://net-internals/#dns

Then a screen like this will appear and we click on the Clear Host cache button .

In Firefox we could also do the same and also in the address bar we would have to type this:

about:config

Then we would have to filter and look for the network.dnsCacheExpiration string . Then we select it and set  its value to 0 . This way we can prevent Firefox from using its DNS cache.

Clear Windows DNS Cache

Another cause of the Resolving Host error may be the Windows DNS cache. To clear it, simply open a command prompt window and run this command.

ipconfig /flushdns

Here is an example of how to flush the Windows DNS cache using this command.

Other possible causes of this failure

A solution to the Resolving Host error can be to modify the Windows “hosts” file. It is located in the following path:

C:WindowsSystem32driversetchosts

To edit this file, we will open it with Notepad with administrator permissions. This can solve the problem if the DNS server uses an old IP address or none at all, as long as we know the correct IP.

Finally, to resolve the Resolving Host error we could check the proxy or VPN settings if we are using one. In case you are not using a proxy or VPN, then you will have to open a packet analyzer like WireShark and analyze in detail what communications our computer is making, in order to detect if there is any problem in the communication and DNS resolution.

Fix Timed Out error due to connection problem

First of all, we are going to give some tips to solve the Timed Out error when it comes to connection failures . This could occur mainly with the router and the wireless network itself, but also problems with the DNS servers we are using to browse.

Restart the router

Something essential when we encounter an error of this type is to restart the router. Conflicts could arise when resolving requests . This can occur if we have many devices connected or, although it is not the most common, when the device has been running for a long time.

To properly restart the router and for this to really help, we must keep the device off for at least 30 seconds . If we turn it off and on quickly, it is as if we had not done anything, since it keeps everything as it was.

Check that the Wi-Fi network is working properly

The most common error is that the Timed out error appears when we are using Wi-Fi. This is because the connection is more unstable and in many cases the signal quality is not the best. Our computer has problems connecting to the access point, which would be the router or Wi-Fi repeater that we use, and this results in requests to open websites taking too long to arrive.

In this case, what we should try to do is improve the quality of the wireless network. The signal will probably be weak and the speed will not be adequate. We can choose to use a Wi-Fi amplifier, but even with small changes such as choosing another band or channel we can significantly improve the quality.

For example, if we are using the 5 GHz band, we can try using the 2.4 GHz band. The first offers the highest speed, but if we are far from the router we may have more problems and this could lead to instability and the appearance of these errors.

We can also try changing the Wi-Fi channel we connect to, which would require us to access the router’s settings and choose a different channel. If we are using the same channel as our neighbours at the same time, it could cause saturation. This happens especially when we browse in the 2.4 GHz band.

Change DNS servers

DNS servers are very important to open any web page. They act as translators and allow us to only have to put the name of the site in the browser and it will automatically translate it to the corresponding IP address. For example, if we put RedesZone, the DNS servers we are using will resolve that request and forward it to the website’s IP.

Why should we change the DNS when we have problems like this? If the DNS we are using takes too long to translate any domain name, it would result in a Timed Out error and the page would not load.

We usually use the DNS provided by the telephone company we use and this does not mean that it will go wrong, but we could find ourselves in a situation where they do not work well due to saturation, for example. We can try using the public DNS of Google or Cloudflare , which are some of the most used and that work best.

To change the DNS servers in Windows we have to go to Start, go to Settings, Network and Internet, Change adapter options and there we select the network card that we are using and with which we are having problems. Normally this type of error appears when we are connected via Wi-Fi, so we have to select the corresponding wireless network card.

We have to right-click, go to Properties, select Internet Protocol version 4 and then Properties again. There we will find a new window where we can change the IP address and the DNS servers we are going to use. This last point is what we are particularly interested in. We will have to click on Use the following DNS server addresses and fill in the corresponding data. For example, Google’s DNS are 8.8.8.8 and 8.8.4.4.

Renew DNS and IP

The DNS cache , which stores all requests when opening web pages, could also cause problems with the Internet connection and lead to errors such as Timed Out. Therefore, what we are going to do is renew both the DNS and the IP address from Windows.

In this case we are going to use the command line. We have to go to Start, type Command Prompt and run it with administrator permissions. There we will have to run the following commands:

• Ipconfig /flushdns
• Ipconfig /registerdns
• Ipconfig /release
• Ipconfig /renew

The first two commands will allow us to clear the DNS records cache and renew them. These will allow us to fix errors caused by a blockage of these records. The other two commands are used to release the IP address and request a new one from the DHCP server, which would be the router.

How to avoid this problem at the software level

We have seen what to do if the Timed Out error appears and it is due to a connection failure. Normally, this is the case and we must restart the router, change the DNS servers or make sure that the wireless connection is working properly. But it could also be caused by a software failure , which is usually due to a problem with the browser .

Check that the browser is updated

First of all, we need to make sure that the browser is properly updated . Sometimes an update hangs and even though everything seems to be working fine, some files are corrupted and this leads to errors like the one we see in this article.

To check if we have the latest version of Chrome, we have to go to the menu, open Settings, access Help and click on Information about Google Chrome. It will automatically show us the version we have installed, and if there is a pending update we can add it manually.

Disable extensions

But if there is something that can affect the browser, it is the add-ons that we install . We have many available to read documents, save pages to read later, etc. The most used browsers such as Chrome and Firefox have a large number of options. However, sometimes they can generate errors.

Especially if we have installed a recent extension and the Timed Out error has appeared when opening a website, we should deactivate it. Likewise, if we suspect that a plugin may be the cause, we can deactivate it and see if the websites open normally.

Check for adware in your browser

Can malware or a browser security issue cause this error? Yes, it can. Typically, the browser is affected by search bars that appear without us knowing what we have done or by many pop-up windows full of advertising. This is a sign that there is adware in the browser .

Adware can enter in different ways. For example, if we install a malicious extension by mistake, if we click on a banner that is actually a scam, etc. What we should do is check that the browser is clean, that there are no threats and, if there are, remove them. We can use a good antivirus such as Windows Defender itself, as well as other options such as Avast, Kaspersky, Bitdefender…

See if any firewalls or VPNs are interfering

Another software-related cause is if we are using a security program or even a VPN . In the first case, it is most often a firewall that could be blocking or limiting the operation of the browser. We should check that it is not configured to block that program and we can even stop it momentarily and see if we can avoid this problem.

On the other hand, if we use a VPN to browse the Internet, it could also be affecting it. This type of program encrypts the connection and if, for example, we open a website in the browser, it will go through that VPN. If there is a failure, it will directly affect us. We can also try to turn it off for a moment or connect to another server that has better performance. This could also happen if we are browsing through a proxy, which also acts as an intermediary.

«Error when RCP server is not available»

When the error “RCP server is unavailable” appears, it will cause access to certain files to be restricted . However, we can take into account some tips to be able to solve it quickly. It is a failure that, in general, is easily solved, although it is necessary to carry out some actions in Windows 10 operating systems. RCP stands for “Remote Procedure Call” or also known as “remote procedure call”, it is a basic tool to establish client-server communications, it is responsible for regulating communication between operating system processes, with the aim of exchanging information between system processes.

This problem appears when a Windows 10 computer cannot communicate with another device within the same network. The reason may be varied, such as a poorly configured firewall or some third-party software that is causing problems. It could also be that we have a firewall within the same network that is preventing the communication of all the data that is trying to be exchanged.

Restart RCP server

One of the main steps we need to take is to restart the RCP server . This way, the Windows system will reestablish the connections and will be able to recover the processes that may be failing for some reason.

To do this, we have to go to Start, look for Administrative Tools and open it. Then we have to go to Services. Once we are here, we have to look for DCOM Server Process Launcher and double-click it.

You must ensure that the startup type is set to automatic and the service status is running. Click Start and restart the computer.

Clean boot of the computer

As we said before, one of the causes of the RCP server is not available error is when there is some kind of software generating a conflict . We can clean up the computer’s startup and thus make sure that there are no third-party programs that could be causing problems.

To do this, we have to go to Start, type System Configuration and then a new window will open. There we have to go to the Services tab and check the box Hide all Microsoft services. Then we check the services that appear in the list and click Disable all .

Once this is done, we go back to Start and this time we open the Task Manager. We have to go to the Start tab and then we disable each of the processes that appear. We restart the computer so that the changes are applied correctly, and when it starts again you can try to run the program again and we should already have communication.

Check that the network is working properly

It may happen that when browsing via Wi-Fi we have network problems . Maybe it is not connected or the signal is weak and there are cuts, this is something very common that usually happens in WiFi wireless networks, also, if the network is very congested we could also have communication problems. This could also happen if we browse via LAN cable, but it is much less common because in this kind of communication there are no weak signals or cuts, either we have communication or we do not have communication, there is no middle ground.

In both cases, we need to check that the network is actually working properly. This is a basic and simple process. We simply need to check that there is nothing misconfigured related to the IP address or DNS that we use. If we have a DHCP server, we should make sure that we have obtained a private IP address correctly. We need to verify that no conflict is being generated that causes the error that the RCP server is not available.

Update or reinstall network drivers

Another point to consider is updating the network card or reinstalling it. Sometimes there could be errors of this type related to an error with the drivers. It can arise if we have recently updated the computer, for example. To do this we have to go to Start, type Device Manager, go to the Network Adapters section, look for the corresponding one and click with the second mouse button to hit Update. We can also disable it and re-enable it.

Although the Windows 10 operating system has a large number of drivers for the different Ethernet and WiFi network cards, it is always highly recommended to go to the official website of the network card chipset manufacturer and manually download the latest drivers to later install them. It is recommended that every 3 or 6 months we check if we have new drivers, because they solve operating problems and improve the stability of communications.

Configure the firewall correctly

It could also be a problem with the firewall. This type of tool is very useful for protecting our network, although it can also cause problems when browsing or starting certain services if there is a misconfiguration.

Therefore, another tip is to configure the firewall . See if there is something wrong that is blocking traffic. We can try to simply pause it momentarily or also see if it is blocking some type of service that it shouldn’t. We must remember that Windows 10 has a fairly configurable firewall that will protect us from the main attacks that could be carried out on us. Normally, in our home we will configure “Private Network” to allow traffic to our computer, and not use “Public Network” because network traffic will be denied.

Change registry settings

Before making any changes to the registry, it is advisable to take a full registry backup, it is quite simple, just press Windows + R keys > type regedit.exe > click File > Export > This will export all the registry keys. Once you have the backup, follow the steps to fix invalid registry entries causing the RCP not available error.

To do so, simply follow these steps:

Press the Windows + R key combination and open the Run dialog box.

Type regedit to open the Registry Editor.

Now you must go to the route:

TeamHKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesRpcSs

Then double click on the Start entry and set “Value data” to 2.

Repeat the steps and modify the startup value in the following 2 registry keys and change the value data to 2:

TeamHKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesDcomLaunch

TeamHKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesRpcEptMapper

After modifying the 3 keys, you can exit the Registry Editor and reboot the system, and the “RPC server is unavailable” message should disappear.

Restore the system

In case all of the above has had no effect, another point to consider is to restore the system to a previous state. It is possible that we have made some incorrect configuration, installed something that has changed our system in some way.

Fix NetTcpPortSharing cannot be started error on Windows

Windows services are programs that run in the background while you are using the operating system. They can be started manually, automatically, or when an event occurs. One of them is the NetTcpPortSharing service . In some situations, even if you have configured it to start automatically, it may not work. In this tutorial, we are going to explain how to fix the Net.Tcp Port Sharing service cannot be started in Windows.

In case you don’t know, the NetTcpPortSharing service is the one that allows several users to share TCP ports through the Net.Tcp protocol. It should be noted that, by default, the Net.Tcp port sharing service is disabled, so we will have to enable it manually the first time we use it.

What error does NetTcpPortSharing cannot be started show?

At some point some Windows users have had to deal with a problem with the port sharing service when NetTcpPortSharing fails to start. In that situation, they have received an error message like this or similar to the one below.

In this message, it explains that the NetTcpPortSharing service could not be started due to an error. Specifically, that the start or control request was not responded to appropriately. In addition, when they went to the Windows event viewer, they did not find any relevant information that would indicate why NetTcpPortSharing could not be started.

As for the solutions that we can implement to solve the problem are:

• Set NetTcpPortSharing port sharing service to autostart
• Enable .NET Framework 3.5 dependency.
• Winsock reset.
• Restore the system.

Below, we will explain how to perform each one correctly.

Setting the NetTcpPortSharing service to autostart

Sometimes, the NetTcpPortSharing port sharing service may get stuck in a state where it cannot be opened or closed. This causes NetTcpPortSharing to fail to start, and to resolve it we are going to follow these steps:

• We press the Windows + R key combination  to invoke the Run dialog box. We could also do this from the Windows Start Menu.
• In Run , type services.msc and press enter to open Services .
• On the right side of the Services window, we need to locate the NetTcpPortSharing Service .
• We double-click on the entry to edit its properties.
• We check that the option in the  Startup type menu  in the service properties window is set to   Automatic .

This would be the service screen and the red boxes indicate where you have to make the changes.

The next thing we need to do is:

1. Click on Apply and  Accept to save the changes.
2. We are closing Services.
3. We restart the computer.

In the hypothetical case that the service is already set to automatic , then we click on the  Stop button in the Service Status  section  and then enable it by clicking on the Start button .

Enable .NET Framework 3.5 dependency

Another reason why NetTcpPortSharing cannot be started may be related to Net Framework 3.5. In this case, to fix the problem we will follow this procedure:

• Start Menu.
• We write Run and press enter.
• In Run, type appwiz.cpl  and  press enter.
• Once inside Programs and Features on the left side we click on  Turn Windows features on or off  .
• In the pop-up window that appears, click the  .NET Framework 3.5 checkbox  and then click the + sign to expand the section.
• Now, we select the Windows Communication Foundation HTTP Activation   and   Windows Communication Foundation Non-HTTP Activation  check boxes  .
• Finally, we tap on Accept  to save the changes.

This is a screenshot where you can see the NET Framework 3.5 checkboxes that we need to activate:

If we see that both options are already set, we remove them to disable them temporarily and restart the computer. Then we come back here and activate them again. Finally, we restart again and check if it works correctly.

Reset Winsock

Resetting Winsock will help us resolve errors related to the Transmission Control Protocol and Internet Protocols. To do this, go to the Start Menu , type Command Prompt and right-click on it and choose Run as Administrator .

Then we put the following command and press enter:

netsh winsock reset

This way, I will be resetting all the default values ​​of the local network, and you should no longer have any problems with the NetTcpPortSharing error on Windows operating systems.

Restore the system

A system restore is basically a true reflection of the Windows files and other application files installed on your system at a specific time. If we have this option enabled, it can be a good solution when NetTcpPortSharing cannot be started, since we would return to a time when it was working correctly.

To do this, type restore in the Start Menu  . A screen like this will appear:

Then we click on restore system and then we choose the restore point that interests us the most. Finally, another option is to restore a backup that we have of the operating system in a previous state, in case you do not use the restore system option of Windows 10 itself, there are very advanced backup programs that will allow us to have a clone of our hard drive or SSD to later restore it whenever we want.

One of the most popular programs is Acronis True Image, a paid program but that allows us to make very advanced backups and restorations, we can encrypt the backup, transfer the copy to a Samba server on the local network, to a local or remote FTP server, and we can even use the Acronis cloud to host the backup on the Internet, so that we do not have to store it locally on an external hard drive.

Steps to avoid error 0x800c0006

So, what should we do to fix the 0x800c0006 error and be able to install .NET Framework 4.0 normally on Windows? The full message will indicate that the installation has not finished correctly or that the file has not been downloaded correctly from the Internet. Therefore, we need to take action and reverse this situation.

Check for possible connection problems

Is the connection working properly? One of the reasons why this problem may appear is that we have a fault with the network and this prevents us from downloading or installing applications such as the .NET Framework 4.0. Therefore, we must check that everything is fine.

We can first verify that we actually have a connection. To do this, simply go to Start, enter the Command Prompt or CMD and ping Google , for example. This would be to execute the command ping 8.8.8.8 and see if we get a response.

If we are connected via wireless networks, we can see if it is possible to improve connectivity. For example, moving closer to the router, using a repeater, using a cable… Any option that allows us to have a good connection that is stable and fast.

Download the file to install it offline

Many times we have the option of installing an application directly online, from its website for example, and also downloading the file and installing it later on the device, offline. The first option may be the one that is giving this error when trying to run .NET Framework 4.0. Therefore, we are going to try downloading and installing it manually.

To do this, we have to go to the official Microsoft website and enter the corresponding parking lot to download .NET Framework. There we have to choose the language we are interested in and we click on download manually and save it on the computer to install it later.

Unlock the installation file

As we mentioned above, another reason why this problem may appear is that the installation file is blocked. If after downloading it directly from the Microsoft website we still get an error when installing it, it may be because it is blocked.

Unlocking it is very simple. We have to right-click on the file and go to Properties. An image like the one we see below will appear and we have to check the Unlock box . We click OK and try to run the file and see if we can install it normally this way.

Check for problems with Windows Update

The next thing to check is that there are no problems with Windows updates . It may be that the operating system is outdated and there is a version pending to be installed or there may even be a failure with a previously installed update.

We have to go to Start, enter Settings and go to Update and security. There we will see which version we have installed and if there is something pending or not. If files appear that we need to install, we must add them as soon as possible. This will avoid problems, but it will also help us improve security.

If an update has been blocked, what we should do is reset the Windows update components. This will help us solve many problems of this type and we will be able to add the files without any major problems.

Return to a previous point in the system

Another point to consider is to return to a previous point in the system when everything was working correctly. It may happen that after an update complications arise, something goes wrong and the system does not respond as it should. Even after updating again the same thing continues to happen.

It could even happen that we have installed some program or add-on and that has caused errors on the computer. Therefore, this may be the main solution to fix this type of error when running .NET Framework 4.0.

We have to go to the Start menu and there we look for Create a restore point in the system. Then we select Restore system and a new window will appear to choose a recommended restore point, although we can also choose any other that interests us.

Once the process is complete, our computer will be exactly as it was at that restore point, before any errors occurred. For example, before installing a program or before an update that could have caused problems.

In short, error 0x800c0006 will cause .NET Framework 4.0 to not work properly. We have seen that there are different possible causes, as well as several solutions that we can take into account to make it work correctly. It is a simple process that will allow us to install it normally on the computer.

What can cause error 0x89231806 and how to avoid it

In many cases this error is related to the Teredo adapter and the  Microsoft IPv6 server . Other possible causes would be that our ISP, firewall or home router is blocking the Teredo adapter. Generally when we see the error message 0x89231806 on our screens we will see the following:

That error screen means that your network settings are blocking group chat due to error 0x89231806, every time we try to join an active group chat. In that sense, a list with the most common failures that can cause this error we have:

1. The router is blocking Teredo after seeing that it is using an IPv6 connection.
2. Strict NAT issue on our router.
3. The Teredo network adapter is locked.
4. An external firewall is interfering with our connection.

We’ve seen that Teredo , when it fails to function properly, can be the problem. In case you don’t know, it’s a transition technology that will provide IPv6 connectivity to hosts that support IPv6 but are connected to the Internet via an IPv4 network. In addition, one feature that distinguishes Teredo from other similar protocols is that it is able to perform its function even behind NAT devices, such as a home router.

Now we are going to explain one by one the possible solutions that we can find to resolve this error, we will start with the firewall.

Firewall related failures

In some cases, the 0x89231806 error has been resolved by disabling your third-party firewall. Several such firewalls have been shown to cause problems with the Xbox. One test you can do to check if this is true is to temporarily disable that firewall. On the other hand, if this firewall is the cause of the problem and you want to keep it because you like its protection and handling, you could try including the blocked IPs in an exceptions list.

However, one solution that some researchers have suggested is that the best solution is to have the Windows firewall running for the chat to work. If we want to check that it is active we will follow these steps:

1. Let’s go to Start Menu .
2. We write Services.smc and press enter.
3. There we look for Windows Defender Firewall .

Then we will see a screen like this:

Here we have to check that the status is set to “running” and that the startup type is “automatic”. Then, also from the Start Menu, it would be good to access Windows Defender Firewall with advanced security and review its configuration.

On the left, click on Windows Defender Firewall with Advanced Security , which you can see in the red box above. Then, press the right mouse button and click on Properties.

In this case, we need to review the domain profile, both the private and the public one. It should be configured like this:

• Firewall status: active
• Incoming connections: block.
• Outgoing connections: allow.

Then if we have to make changes we will have to restart the computer and see if we have solved the error 0x89231806.

NAT problems with the router

Sometimes this error is due to a problem that console gamers often face. This error they have with their router’s NAT is usually called strict NAT. Usually the error they receive is of the type NAT not available because it cannot obtain an IP address from Teredo and they receive the error message 0x89231806.

Among the available solutions we can find:

1. Enable UPnP to update our NAT table.
2. Check for a router firmware update.
3. Using DMZ port forwarding, which consists of opening all ports to an IP. This is not a very advisable option, because it has a negative impact on security if the target device is not well protected or configured. After using it, it would be advisable to remove it.

Disable VPN and Hamachi type programs

We are currently living in an era where there is a greater desire to protect privacy. There is also a desire to bypass politically motivated geoblocks to access certain websites or enjoy streaming multimedia content. That is why VPN connections are booming. In case you don’t know, Hamachi is a network virtualization software that allows devices connected via WAN to emulate a local area network (LAN).

Some VPN or Hamachi users have reported experiencing error 0x89231806. In such cases, the best thing to do is to disable those connections and restart your computer.

Check that we have the Teredo tunnel interface enabled

One of the causes that can also cause this problem may be due to the Teredo tunneling interface being disabled. Therefore, one way to find out if this is the fault that is causing us problems is to check if this interface is working correctly. The first thing we are going to do is go to the Windows Start Menu , type run and press enter. Next, you have to type devmgmt.msc and press “enter” or “ok” again to open the device manager.

Once inside the Device Manager, we expand the Network Adapters drop-down menu. Next, we go to the View drop-down menu and choose Show hidden devices . After doing this, we should see the Teredo Tunneling interface appear.

Then we right-click on the Teredo Tunneling interface and choose Enable. If it is enabled, we disable it and re-enable it again.

Switch to an alternate IPv6 server

This bug has also been fixed by changing the default Microsoft IPv6 server to an alternative one. To do this, follow these steps:

1. Start Menu.
2. We write CMD.
3. We click on the right mouse button and choose run as administrator.

Here you can see all the steps:

Once inside that Command Prompt window, all we have to do is run this command:

netsh int ipv6 set teredo client teredo.trex.fi

As you have seen, we have to follow a long series of steps to solve the error 0x89231806 in the network configuration, but we are sure that if you have followed it step by step you will no longer have any problems and everything will work correctly.

What is error 45 and why does it occur in Windows?

Error code 45 refers to a fairly common problem that Windows users have. This error occurs when our operating system cannot recognize a piece of hardware that we have connected to our computer.

When this error occurs, it can block the window of the program we are using, make Windows respond very slowly or temporarily crash for a few seconds. It should be noted that this error has been occurring since Windows XP, and is still in effect in the latest versions of Windows 10.

Regarding the causes why error code 45 usually occurs, we have the following:

1. The problem may be that the device has been disconnected from the computer and needs to be accessed. One possible solution is to reconnect it. For example, this can happen with USB devices such as Wi-Fi network cards.
2. It could also be because the drivers are corrupted or have become obsolete due to an update.
3. That hardware device is defective. We could also add that the connection point is damaged, we are referring, for example, to the USB port, although this option is less common.

How to know that I have an error code 45 in Windows

We have previously mentioned that this error is closely related to the Windows device manager. For this reason, we are going to go to that section and follow these steps:

1. Let’s go to the Start Menu .
2. We type Control Panel and press enter.
3. We click on Hardware and Sound .
4. Within Devices and Printers we look for Device Manager and select it.

Next, in Network Adapters we will see that the Wi-Fi card has a blurred icon along with some other devices. This indicates that we have problems.

If we want to find out what specific fault we have, we click on our network adapter, press the right mouse button and select Properties .

In the General tab , it tells us that our problem is related to error code 45. It also tells us that, to solve the problem, we should start by reconnecting that hardware to the computer again. If it is a USB device and it continues to fail, trying another USB port may be an option. If this does not solve the problem, we will think that it is a software problem where a faulty driver is usually the main cause. One thing that is recommended before starting would be to look at the Driver, the driver date and driver version. This way, if a change is made when updating it, it will be easier to see the changes.

Troubleshooter and chkdsk command

Let’s start by trying the first two alternatives that we have to solve error code 45. After having verified that connecting the device again does not solve the problems, it is time to run the Windows troubleshooter for which we will follow these steps:

1. Start Menu .
2. Windows Settings .
3. Update and security .

On the left we select Troubleshoot and click on the Additional troubleshooters option .

Then we look for the Network Adapter section , press the Run the troubleshooter button and follow the instructions it gives us.

If the problems still persist and we are unable to fix the error code 45 problem, we should check that our hard drive is in good condition and is not damaged. To do this task we have to open a “Command Prompt” window run as administrator. By typing CMD in the “Windows Start Menu” we can access it.

Then we need to run the following command:

chkdsk /f

It then tells us that it cannot run the process because we are using the volume.

What we have to do is answer yes with an S so that after restarting Windows it will check our hard drive.

This process can be quite long and depends on both the size and speed of the disk.

Check that Windows is working properly

As in the previous case, to check the integrity of Windows, we are going to use another pair of commands that we will run as administrator in a Command Prompt window. We will start with sfc /scannow that will examine all protected system files and replace them if they are damaged. Here we see how it performs the process:

At the end we see how he has found a series of errors and repaired them.

The next command we are going to use is this one:

DISM /Online /Cleanup-Image /RestoreHealth

Here we have it running:

After successfully completing DISM with your previously set parameters, you will see a screen like this:

However, if error code 45 continues to occur after this, you need to update the drivers.

Update drivers to fix error code 45

We will also do this from the Windows Device Manager . Then, in Network Adapters, we click on ours and then with the right mouse button, we click on update driver.

Next, what we are going to do is click on  Search automatically for drivers .

If it finds drivers it will show you a result like this:

Also, if you can connect with another network adapter such as a different Ethernet or Wi-Fi network card, it can be positive. This way, because it will allow you to download drivers from the Internet, we will have a better chance of success.

On the other hand, also within Update driver we also have Browse my PC for drivers .

There, in Search for drivers in this location , if we have those drivers because we have downloaded them at some point or we have them on a removable storage medium, we can install them from that option. Also checking if we have updates can be a good idea since sometimes it updates drivers.

Solution to download the driver directly from the manufacturer’s website

Another thing that we should not rule out to solve problems with error code 45 would be to visit the website of the manufacturer of that network adapter, laptop or desktop computer. The most well-known laptop brands usually have their support section where we can find the drivers for the network adapters.

Also, one of the most well-known manufacturers that also has network adapters is Intel, so if we know the exact model one solution may be to go to Intel’s download center .

Solution to system error 67

Normally this problem appears due to an error with the network card drivers . They may be outdated, not installed correctly or there may be some kind of problem with them. This results in the network name not being found and the system error message 67 being thrown. But it may also be that there is a problem with the operating system that prevents it from working correctly. For example, an update that has been stuck or that has generated a conflict with the network adapter. This is something that can happen when we install new versions on some occasions.

A configuration that we have made could also have caused this problem. If at some point we have touched something and it has not worked correctly, maybe that is the reason why it cannot find the network name. It may even happen that we have installed a program or that a file is corrupted . This can also affect the functioning of the system and prevent certain features from working normally. We will have to review this and see if it could be the reason.

So, what can we do to fix this problem? Just as it can appear for different reasons, we also have several possible solutions that we can implement and get it working normally. Let’s see what we should do. Some simple steps that can help solve the causes we have described.

Update network drivers

The first thing we need to do is check that we have the network drivers correctly updated. If they are not, it can lead to problems such as system error 67 that we mentioned in this article.

We have to go to Start, type Device Manager, go to Network Adapters , select the one that corresponds and click with the second mouse button. Once this is done, click on Update driver. This will install the latest version available, something highly recommended not only to avoid problems of this type, but also to ensure optimal performance and to work as well as possible.

Alternatively, if we see that this does not work, it may be that there is a conflict with the drivers and that even if they are updated they do not work correctly. We will have to follow the same steps above, but this time we click Disable. The system will then reconfigure it.

Check that Windows is properly updated

It is equally important that Windows is well updated. If we have recently installed a new version and it has had some problems, this can lead to failures of this type. We will have to verify that we have the latest versions and that they are correctly installed.

We have to go to Start, enter Settings, go to Update and security and there it will show us whether or not there is a version pending to be installed. We must verify that we have the latest version installed correctly and if there are any pending files, install them.

An update may have been left halfway complete if, for example, we lost our Internet connection or there was a system failure. This interruption will cause the update to not be completed correctly and lead to this type of failure, such as system error 67, which cannot find the network name.

Reset the network

We can also reset the network. When problems of this type appear with the adapters, it is a feature that comes integrated with Windows. To do this we have to go to Start, enter Settings, Network and Internet and there click on Network reset .

What this function does is remove all network adapters and reinstall them. If for example there has been a failure with the configuration or some element does not work correctly, this can fix it. It is a quick process that only takes a few minutes. Once finished, we restart the computer and see if it works normally.

Check for corrupted files

It may also happen that there are corrupted files in the system and that causes some components to not work properly. Therefore, what we are going to do is analyze if there are corrupted files and repair them in the Windows system.

We have to go to Start, type Command Prompt and open it with administrator permission. Once started we must run the command sfc /scannow . This will take a few minutes and then it will show us if there are any damaged files and correct them. It is an automatic process and we will see the information in the command line.

There may be corrupted files, for example, if we have installed an update and it has not finished correctly or if we have installed a program and there has been an error. All of this can generate conflicts in many system components and cause it not to work as it should.

Disable IP NAT

Another possible solution is to disable IP NAT or the network address translator. This may be another cause of this failure and by disabling it we can check if this solves system error 67.

What we are going to do in this case is go to Start, type Device Manager, in the top menu click on View and select Show hidden devices. We have to click on the Non-Plug and Play Drivers category, click on IP Network Address Translator and click on Disable.

In short, system error 67 can appear and prevent the network adapter name from being found. We have seen that the causes are varied, although it will mainly be due to a problem with the card drivers, an update or damaged files. We have also shown a series of steps that we can carry out to solve this conflict and make it work normally.

Fix .NET Framework error 0x800F0950

First of all, we are going to explain why the .NET Framework error 0x800F0950 appears . It is a problem that appears in both Windows 10 and Windows 11. This happens when trying to install the application or also when using any program that needs to use it. It throws a message indicating that the function could not be installed and the changes could not be completed.

But why does this problem occur? The truth is that there is no specific reason, but there are several possible causes. One of them is that there has been a power outage during the installation . For example, if the power has gone out or if we have lost connection for a moment due to a problem with the router. This will cause the installation to not complete correctly or there will be corrupted files. Another very common reason for this type of problem is that we do not have the latest Windows updates installed. But even if we have installed them, it could happen that there has been an error and some file has been hung or has not been installed correctly.

Related to the above is the possibility of corrupted files on the system. For example, after you have installed an application and it has given you a problem. This can affect other components and applications that you have installed.

After explaining the main reasons why error 0x800F0950 may appear in .NET Framework, we are going to explain what we should do to solve the problem. A series of simple steps that we can carry out and points to check on our device.

Update Windows

The first thing we need to do is check that we have Windows updated correctly. This can be the solution to many problems of this type, so we need to check and install any new version or pending files.

To do this, we have to go to Start, enter Settings, go to Update and security and there it will appear whether or not there is something pending to install. It is possible that some update was left pending and was not completed correctly. It will appear there and we have to update it manually.

Once this process is complete, we will simply have to restart the computer so that the changes are carried out correctly and have the updated files ready to avoid any type of problem.

Check that there are no corrupt files

Another common cause of the 0x800F0950 error is corrupted files on the system. This is partly related to the above, with updates, as it may have happened that something has not been installed correctly and has generated a conflict. But it may also be due to a program that we have added or any component that has stopped working as it should.

In this case, what we are going to do is check that there are no corrupt files and fix it if necessary. We have to go to Start, type Command Prompt or CMD and open it. Then we have to run the command sfc /scannow .

What this integrated system function does is check that there are no files that are damaged and repair them if necessary. It is a process that can take a few minutes. When it finishes, we restart the computer so that everything works correctly.

Install .NET Framework from Windows Features

We can also install .NET Framework from Windows Features , an option integrated into the system from which we can add or remove certain components. This could cause some problems, such as connection failures or the file we are trying to install being damaged.

We have to go to Start, open the Control Panel, click on Programs, enter Activate or deactivate Windows features and there a long list with multiple options will appear. Among them we will see the .NET Framework .

You have to uncheck the box (if it is checked) and then activate it again. Then click OK and restart the computer. This way we will have installed this feature through this method.

Restore the system to a previous point

There may be a corrupted file or a problem with a previous update that has not been properly resolved after performing these steps. Luckily, Windows itself has a function to restore the system to a previous point in time when the computer was working correctly.

In this case we have to go to Start again, look for Create a restore point and open it. You have to click on the System Restore button and it will recommend a point where everything works fine. However, we can select another point manually.

For example, we can do this if the problem has appeared after installing a program or after updating Windows. What we do is return to a previous point in which the system was working properly and did not show the error 0x800F0950.

Using the .NET Framework Repair Tool

Another alternative if all this has not worked correctly is to use the .NET Framework repair tool . To do this we have to go to the official Microsoft website. This tool is generic for solving many types of problems with .NET Framework.

We have to download the file and then run it. It supports different versions and can be very useful when we encounter any similar error and we have not been able to resolve it using the methods we have explained above.

In short, the .NET Framework error 0x800F0950 can appear for different reasons. It can happen because you have corrupted files, an update that has failed, or simply because you haven’t installed the latest version. We’ve talked about what we should do to fix it.

Errors when updating Windows

Updating Windows, as well as any operating system, is very important to solve problems and get everything working properly. However, sometimes we can encounter some errors. We can see that the computer stops working correctly. We are going to show some of the main errors and explain what to do to avoid them.

Steps to avoid error 0x80070659

Can we somehow fix this error? The answer is yes, but we have different options available, depending on the cause of the problem. We are going to describe what steps we can take so that the error 0x80070659 does not prevent us from correctly installing updates in Windows.

Check for possible corrupted files

The first thing we need to do is check if there are any corrupted files on the system. This is one of the main reasons why this problem appears when updating Windows. This can happen if a previous installation did not work well or if a program has caused a conflict. Even malware can cause this.

To check for possible corrupted files, go to Start, enter the Command Prompt with administrator permissions and run the command sfc /scannow . This process will take a few minutes and will show us the results and if anything has had to be repaired.

Reinstall updates

This is very simple. Sometimes these types of errors are temporary and we can install it completely normally in a matter of minutes. It may be that there has been a specific failure with the connection, with the system or even files or programs that generate a conflict.

What we are going to do is simply restart the system and reinstall the updates . We go to Start, enter Settings, click on Update and security and see what updates are pending and install them.

Improve Internet connection

Another point to consider and that we can easily do is to try to improve the Internet connection. This may be the cause of this problem when trying to download and install updates on Windows. For example, if we are connected via Wi-Fi, it is possible that the coverage is poor. Even if there are other computers on the network that may be interfering.

So what we are going to do is configure a repeater if possible, a Mesh system or PLC devices. In addition, there is always the option of connecting via cable to update and thus avoid stability or speed problems.

Also, if the connection is weak we can concentrate it on our device and this is achieved by controlling the others. For example, making sure that there is no other computer downloading large files or uploading content to the cloud.

Return to a previous restore point

On the other hand, we also have the option of returning to a previous restore point . If our computer has had a problem, for example after a previous update or having installed a program, this may be the solution to stop the error 0x80070659 from appearing.

In this case we have to go to Start, look for Reset system and open it. Once inside we have to click on Restore system and choose the restore point from among those recommended or choose another one. By doing this our computer will return to a previous state in which it works correctly.

Once we have returned to this point, we will simply have to reinstall the Windows updates and check if they work correctly. If there was a problem after that restore point, it will most likely work normally.

Download updates manually

Another possible solution is to manually download Windows updates . To do this, go to the official Microsoft website, to the download center . You need to know the update code and enter it into the search engine.

Once we have downloaded it, we simply have to install it. This will allow us to add these updates manually and avoid certain problems that may arise, such as a conflict with the system or a failure of the Internet connection when starting the process.

Give permissions to the .NET Framework 4 file

But we have also seen that the error 0x80070659 appears when updating .NET Framework 4. In this case it usually occurs due to a lack of permissions when trying to install the application. Basically we run it but since we do not have the necessary permissions it does not install and we get this error.

What we are going to do in this case is right-click on the file and grant it administrator permissions when running it. This should allow it to install normally and not cause this problem.

Avoid error 0x8007065e

After explaining the main reasons why Windows Update does not work and error 0x8007065e appears, we are going to move on to the most important thing: how to solve this problem and prevent it from appearing. We can carry out different steps, as we will see.

Check that there are no corrupted files on the system

The first thing we need to do is check that there are no corrupted files on the system. This could be the reason why this error appears that prevents Windows from updating correctly. We can check this in a simple way without having to install anything additional on our computer.

To do this, we have to go to Start, type Command Prompt and open it with administrator permissions. Then we have to run the command sfc /scannow . What it does is check that the system files are correct and that none are damaged. If it finds any error, it will automatically fix it. It is a process that will take a few minutes.

Run the troubleshooter

We can try running the Windows Update troubleshooter . This can help us analyze the problem and see if it finds a possible solution so that the files install normally and we can have the latest version available.

We have to go to Start, enter Settings, Update and security and, once here, click on Troubleshooter and select Windows Update. This process will begin to check for possible errors that may exist and fix them.

Check that there are no interfering programs

We have also mentioned that one of the main reasons why the error 0x8007065e appears is due to a program such as an antivirus or firewall that is interfering. Although they are necessary to maintain security, the truth is that sometimes they can result in a problem and we must control it.

Therefore, we must ensure that they are properly configured and are not interfering. We are talking, for example, about antiviruses such as Windows Defender, Avast, Bitdefender or any other that we have installed. Also firewalls or even VPN programs, which serve to encrypt the connection, which could also generate certain problems that lead to errors of this type.

Improve Internet connection

Sometimes the problem is caused by an error with the Internet connection . This usually happens if we are connected via Wi-Fi and the coverage is not good. The network speed will not be the best and this can prevent us from downloading the files correctly and installing them.

What can we do? If we have the possibility of connecting via cable, that can be a good solution. Otherwise, we can always try to improve wireless coverage through devices such as repeaters, Mesh systems or PLCs.

Download updates manually

We also have the option of downloading updates manually . Sometimes we cannot install them automatically from the system itself and one possible solution is to download the files and install them ourselves on the computer.

To do this, the first thing we need to do is find out what the update code is . Once we know it, we go to the official Microsoft website to download the updates. There we will have to look for the one that corresponds to the code we are interested in and then download the files and install them manually on the computer.

Return to a previous restore point

On the other hand, if what we have done so far has not had any effect, we can always return to a previous restore point in Windows. Sometimes errors occur when we have installed an update or made a change to the system. This results in errors and we are not able to solve them without returning to the previous state.

Windows itself has a function to return to a previous restore point. To do this, go to Start, type Create a restore point and open it. Click on System Restore and you will see different recommended times to return your computer to that state.

We can choose one of them or look for another that interests us more. For example, we can return to the previous state to try to update the computer, if a conflict arose during the installation and it did not finish correctly. In this way we can return to how it was before and have it work correctly. Of course, we must bear in mind that we can lose work done later or any configuration we have made.

How to fix error 0x800f0990

After explaining why error 0x800f0990 appears, we are going to talk about what we can do to update the system normally. Once again, we are not going to have just one possible solution, but depending on the cause or problem with our computer, we will have to take different steps.

Retry the installation

The first and most basic thing is to reinstall Windows updates again . Sometimes the problem is temporary, due to a failure when installing the packages. Simply restarting the process can solve the problem without having to carry out any further action.

To do this, go to Start, enter Settings, go to Update and security and see if there are any updates pending installation and start the process. If the error 0x800f0990 appears again, we will have to take new measures.

Start the troubleshooter

Another step we should take if we encounter this error when trying to update Windows is to start the troubleshooter. This can help us to see different errors and make it possible to solve them from the system itself.

To do this we have to go to Start, enter Settings, Update and security and then Troubleshooter . We have to start the process, which may take a few minutes to complete.

Scan for possible corrupted files

A very common cause of errors when updating Windows, such as error 0x800f0990, is that there is a corrupted file in the system, or even several. This can interfere with the execution of different processes, such as Windows update.

What we are going to do in this case is go to Start, search for Command Prompt and run it in administrator mode. We have to run the sfc /scannow command. It will automatically start checking for any corrupt files and be able to repair them. This will help us to be able to run Windows updates correctly if there is a problem with any file.

Install updates manually

If we see that Windows updates still do not work, another option we have is to download them manually and then install them. This can sometimes be very useful to solve errors that occur during downloading and installation, for example.

To do this, we need to know the update code and then go to the official Microsoft page enabled for downloads . There we have to enter the code corresponding to the update and click on search to download the file and run it.

Try to improve the connection speed

We have indicated that one of the causes of error 0x800f0990 appearing when updating Windows is that the Internet connection is not working well. If the speed is slow and there are any interruptions, this could cause the files to not be installed correctly.

In this case, the solution is to try to improve our connection. If, for example, we are connected via Wi-Fi and the coverage is not good, we can always opt for a cable when possible and thus achieve greater stability and speed. In addition, we can use Wi-Fi amplifiers, PLC devices or Mesh systems to improve coverage and avoid the dreaded dead zones.

Return to a previous restore point

If all of the above has not had any positive effect, there is also the option of returning to a previous point in Windows. This feature that comes integrated with the system is very useful when errors of this type arise. For example, if we have installed a program and it has caused a conflict and stopped working properly, if an update has given errors, etc.

We have to go to Start, look for System Restore and run it. Then we click on System Restore and it will show us recommended restore points. We can also click on any other one that exists. These points are moments in which our computer was working perfectly and everything will return to that moment, with the corresponding configuration and the installed programs.

How to fix error 0x800f0905

So, after explaining why error 0x800f0905 appears , we are going to talk about what we should do to solve it. The objective is none other than to be able to update Windows correctly and for it to work with the latest versions installed. We are going to see different steps that we must take, since there is no single solution, but depending on the error we may need to make some changes or follow some steps.

Run the troubleshooter

The first thing we can do is run the Windows Update troubleshooter . This can help solve certain errors that appear, such as error 0x800f0905. This way we can check whether the process is carried out correctly or not.

To do this, we have to go to Start, enter Settings, go to Update and security, Troubleshooter and run it. We must continue the process so that it analyzes if there is any type of problem and solves it.

Check for corrupted files

Is there any type of corrupted file on the system? We have seen that this is one of the main reasons why the error 0x800f0905 can appear. If this is the case, you should correct any corrupted files so that you can continue with the installation process correctly.

In this case we have to go to Start, look for Command Prompt and run it with administrator permissions. We have to run the command sfc /scannow to analyze and repair possible attachments. The process can take a few minutes and will tell us if there is something wrong.

Restart the Windows Update process

Another reason why error 0x800f0905 may appear when updating Windows is that our device has had an error managing the installation or download. This usually happens if we have limited resources and the process has not finished correctly.

So, on this occasion, all we are going to do is start the update process again . Ideally, update the computer and go back to Start, Settings, Update and security and run it again. This way, if it is a problem like the one we have described, it may end normally.

Improve Internet connection

But one of the reasons for this resource limitation we mentioned is that we have a poor Internet connection . Maybe we are connected wirelessly and very far from the router. That could cause problems in having a good speed to download files and install them later.

What we are going to do is try to improve the Internet connection. What can we do? We could use Wi-Fi amplifiers, Mesh systems or PLC to improve coverage. In addition, whenever possible we can connect via cable and thus improve speed and stability when we update Windows.

Restore the system to a previous point

Sometimes problems with corrupted files, bad configuration or with the installation process itself are not completely solved. This will force us to restore the system to a previous point in which everything worked correctly. It is an option that is integrated with the Windows system and that we can use when we encounter errors such as error 0x800f0905 that prevents the system from updating.

We have to go to Start, type System Restore, click on Run and it will show us a recommended restore point, although we can also choose any other that has been created. We just have to mark the one we are interested in and click on Continue the process. Once finished, our computer will be as it was at that moment, with the corresponding configuration.

Download updates manually

If all of the above has not had any effect, we can always download and install the updates manually . This process can help avoid complications related to poor connection and cuts, errors in system files, etc.

In this case, we have to go to the Windows updates page , and first find out the code that corresponds to that update. Once on that website, we have to search for the code and download the update.

How to avoid error 0x80090011

First of all, we are going to explain why this type of error can appear. It is important to know the cause in order to take measures to help us solve it. One of them is that we have a problem with the Internet connection. For example, the Wi-Fi coverage goes out for a moment and that causes the files not to download correctly. It may also happen that there are corrupted files in the system. This can lead to errors when updating the computer or installing a component. It could be linked to a previous update that failed or when installing a program and has caused a conflict at the software level.

Another reason is that some hardware is causing problems. For example, headphones that we have connected, a mouse, a printer… This could be the reason why, when trying to update Windows, the system crashes and throws an error code 0x80090011. Therefore, there are various reasons why this error may appear when updating Windows. However, in most cases it can be solved in a simple way as we will see.

After explaining the main reasons why error 0x80090011 appears when updating Windows, we are going to give some possible solutions. This way we can install the new version without the process being interrupted and take advantage of the latest developments. We will not have to install anything additional, nor carry out complex configurations.

Check that the connection works

The first thing we should do is check that the Internet connection is working properly. This is one of the main causes of this error. For example, if we are connected via Wi-Fi, the signal may not be good and this may cause small momentary interruptions that affect the update.

If we see that we do not have a good speed or after analyzing the connection we see that there are indeed cuts, a good idea is to improve the wireless connectivity if we are on Wi-Fi. For example, we can use repeaters, Mesh systems or PLC devices. All of them will help to improve the coverage and avoid problems.

An alternative is to connect via cable when updating Windows. This will provide greater stability and avoid problems that may occur with Wi-Fi. We can even achieve higher speeds, so that the update will finish sooner.

Check the installed hardware

You should especially take this into account if you have recently installed any peripherals . For example, a printer, a new mouse, keyboard, headphones… Those that work via Bluetooth are the most problematic for this specific error. They can create a conflict with Windows and prevent the update from being carried out.

What we should do in this case is disconnect any device that we are unsure of may be the cause. We try to install the update and if it is successful, we will have to see what is happening with that device. For example, the drivers may be incorrectly installed or out of date.

Check for possible corrupted files

Another step we can take is to check for possible corrupted files on the system. This could certainly affect certain Windows functions, including Windows Update. If a file is corrupted, for example after installing a component, it can lead to error 0x80090011.

What we need to do in this case is go to Start, enter the Command Prompt and run sfc /scannow . This will start checking the system files and, if it detects that any are damaged, correct them if necessary so that everything works well.

Update network card drivers

We should also make sure that we have the drivers for the network card properly updated. This is very important to get the Internet speed to be adequate and avoid problems, but it could also be the cause of a Windows update stopping.

In this case we have to go to Start, look for Device Manager, go to Network Adapters, select the one that corresponds and click with the second mouse button. Then we click on Update driver to make sure we have the latest version available.

This is something we should do periodically. We should always have the latest version of the drivers for both Ethernet cards and Wi-Fi adapters. However, if this solution has no effect, we can also try disabling the adapter and re-enabling it so that it restarts.

Problem solver

Another option that we have available in Windows without having to install anything is the troubleshooter that comes integrated with the system. It is very useful sometimes to detect what is the cause of an error. This will help us to take effective solutions and solve the problem quickly.

We have to go to Start, enter Settings and go to Update and security. Once inside, we have to click on Troubleshoot, which appears in the menu on the left. We have to continue with the process until a possible solution is displayed.

Restore the system to a previous point

If all of the above has not had any positive effect, we have the option of restoring the system to a previous point when it was working fine. This is very useful if we have any failure in Windows and we see that it is not solved in any way. Sometimes it happens after installing some program or changing something in the settings.

In this case, what we are doing is returning the system to a previous point in which it was working correctly. We have to go to Start, look for Create a restore point and click on System Restore . It will automatically offer us a recommended restore point, but we can choose any other that interests us.

In short, if you encounter error 0x80090011 when updating Windows , you can fix it by following these steps. This is usually due to a problem with the Internet connection, although it may also be the case that there are corrupted files or a previous update that did not complete correctly. However, with these steps we have described, you should normally have no problems installing the new version correctly.

Fix error 0x8024D009

If you encounter error 0x8024D009 when trying to update Windows to a new version, you should know that there are several reasons. One of the most common is that there is a corrupt file in the system. This prevents the update from being correct and ends up with the process getting stuck. It may also happen that there is a pending update that did not finish correctly. This means that the installation of the following files cannot be carried out, even if they are more recent. This can happen if, for example, we lose Internet access when the computer was downloading files.

But the last thing we mentioned, the fact that the connection fails , can be the direct cause of why Windows is throwing the error 0x8024D009 at that moment when updating the system. If we lose Internet, even momentarily, we would not be able to download the files correctly and these errors would appear. On the other hand, malware could be the cause of the problem. If we have recently installed a program or downloaded a file, it may contain a virus that is damaging the system and preventing us from updating it correctly. This is common when similar errors arise.

So, what can we do to fix error 0x8024D009 so that Windows can update correctly? We are going to see a series of steps that we must take to install the files without problems and for the Microsoft operating system to have the latest version. This is very important for it to work well and also to maintain security.

Scan corrupted files on the system

The first thing we need to do is to scan for any corrupted files on the system. This can prevent some processes from starting normally, such as Windows Update to update the computer. This could be the cause of error 0x8024D009 and we need to check it.

We need to go to Start, enter the Command Prompt and run the command sfc /scannow . This will scan the system for any corrupted files and fix them if necessary to keep it running properly.

Check for previous updates

This step is very simple, but we must do it. It simply consists of verifying that there is no file that has been left pending in a previous update . To do this we have to go to Start, enter Settings, go to Update and security and see if there has been any problem with any update.

If this is the case, we should install everything that is available so that Windows can have the latest version without problems. A conflict can arise if there is a pending file and that is why this type of error appears.

Check that the connection is correct

Is the Internet connection good or do we have small interruptions or poor coverage ? This point should be especially taken into account if we connect via Wi-Fi, since sometimes the stability is not the best and we can have a sudden loss of speed that limits file downloads.

If your Internet connection drops out while downloading an update, even for just a moment, it can cause errors like 0x8024D009 . What you can do if you notice that the speed is not good or that there may be small interruptions, is to connect via cable when you are going to update Windows.

Alternatively, we can move closer to the Wi-Fi router or even use devices such as PLCs, repeaters or Mesh systems that help us improve coverage and have greater speed and stability wirelessly.

Pass the antivirus

A virus could be the cause of these problems when updating Windows. Therefore, our advice is to use a good antivirus and scan the computer for threats. You can use Windows Defender or any other reliable program, such as Avast or Bitdefender.

Especially if you recently installed a program, such as a browser extension, you could be unwittingly introducing a virus into Windows. This will affect performance, but it can also block some processes, such as the update process.

Run the troubleshooter

We can try the Windows troubleshooter to show us what the error may be and fix it. To do this, go to Start again, enter Settings, Update and security and click on Troubleshooter, which appears in the menu on the left.

This process will analyze possible errors that may exist in the system. It is especially useful for detecting what may be the cause of failures of this type and being able to take measures to make everything work properly.

Restore the system to a previous point

Another step we can take to solve the error 0x8024D009 is to restore the system to a previous point in time when it was working correctly. This is very useful if, for example, a previous update has failed and from then on it has not worked properly. Also if we have installed a program or configured something and from that moment on this problem appears.

We have to go to Start, look for Create a restore point and open it. We have to click on System Restore. It will show us a recommended restore point, but we can choose any other that interests us. Afterwards we restart the system and our computer will be as it was at that moment.

In short, whenever you encounter error 0x8024D009 when trying to update Windows, you should know that it can be due to different causes. The normal thing is that it is a corrupt file or a failure in a previous update process. We have explained the different steps that we must take to solve it.

Error 1005

Error 1005 appears when we are denied access to a website . The request we are making to a server is being blocked. What the server basically does is block our IP address and we will not be able to enter the site we are trying to access. Messages such as Forbidden IP or Error 1005 VPN usually appear, depending on the case.

Why does it appear?

But why does this happen? There are several reasons. One of them is that the people responsible for that website have blocked certain IP addresses and ours is on that list. This will prevent us from entering if we connect through that address and the blocking code will appear. It may also happen that we are using a VPN to browse and that page is blocking access. This is the most common cause, but it will also have an easy solution as we will see. Something similar could happen if we are browsing through a proxy and not directly. The fact that the page has blocked the connection through the VPN or proxy that we use may be due to another user having misused that website. This has caused the IP to be blocked and, indirectly, other users who use that same service to browse the Internet are affected.

On the other hand, beyond the fact that the page has blocked access, it could also be a problem with our system . There are several options here, as it could be that the antivirus is interfering and not allowing that connection, an error with the browser itself or even the date and time of the system are wrong. The latter can occur if we have recently updated the computer, for example.

How to fix this error

Can we fix error 1005? The truth is that we have different options for this, although each one will work depending on the cause of the problem. We are going to show all of them and, as you will see, they are very simple to carry out. You will only have to touch some parameters or configure programs that you already have.

• Check VPN

The first thing you should do is check if there is a problem with the VPN. We have seen that one of the causes of error 1005 is that the page blocks the connection for using this type of program. You can try connecting to another server , as long as your application has this possibility. Also, as a more drastic measure, you can try disabling or even uninstalling the VPN . This way you can see if the error is solved by browsing directly with your real connection and not through a VPN server. If you see that it is confirmed that the error is with the program you use, you can always try installing one of the many alternatives that exist. You should do something similar if you are using a proxy to browse the web. In this case, in Windows, you should go to Settings, Network and Internet and click on Proxy. Once inside, you would simply have to deactivate the proxy if it is activated. You just have to uncheck the box.

• Check that there are no interfering programs

Especially, you have to check that there is no antivirus or firewall that could be interfering with the connection and for this reason the error 1005 appears. As in the case of the VPN, we can see that they are well configured, that they do not block the browser or cause any error. You can always momentarily pause both the antivirus and the firewall. Although it is not a very good idea to browse the Internet without protection, it is a quick and easy way to verify if this is the problem or not and to be able to take possible solutions, such as installing a different program. But you should not only look at the programs installed on the system, but also at the browser itself . If you have installed any extension recently, that may be the problem. Maybe if you disable the extension or uninstall it you can open that page and this annoying Forbidden IP error will not appear.

• See that everything is up to date

Have you updated your system , browser and any other programs such as VPN or antivirus? This is essential to achieve optimal performance and not have problems when trying to access a website or any service on the Internet. You must make sure you always have the latest versions installed. In the case of Windows, you have to go to Start, enter Settings, Windows Update and there check which version you have and whether or not there is a new one available. If so, you will have to install it to get all the improvements in both performance and security. As for the antivirus, in the case of Chrome you can easily find out if you click on the menu at the top right, go to Help and Google Chrome Information. There you will see which version you have installed and, if there is a new one, you can install it.

• Use another browser

A very simple alternative to fix error 1005 when trying to access a website is to try another browser . It doesn’t matter which one you are using, whether it is Google Chrome, Mozilla Firefox or any other. The goal here is to check if it could be a browser problem when using another alternative. There are many browsers available for the computer, for the different desktop operating systems. You simply have to use one that works well, is reliable and is properly updated. This way you can try to access that website you were having problems with.

• Check system time

Another reason why error 1005 could appear when opening a website is that the system time and date are wrong. This sometimes happens after an update or some change we have made. But we can easily see it and change it if necessary. This way we will avoid problems of this type that prevent us from browsing correctly. To do this we have to go to Start, enter Settings and click on Time and date . There you will see the time and date that are configured in the system and you can set any other if necessary. You can always check the option to adjust automatically and the time zone you have marked and thus avoid problems.

In short, if you encounter error 1005 when trying to access a website, it is usually because the page is blocking your IP. This happens when using a VPN, for example. But it can also be due to system failures or a program you use. You can follow the steps we have explained to find the correct solution and browse normally.

Error 0x8007371b

When updating Windows, certain errors may appear. One of them is the error 0x8007371b that will prevent you from updating to a new version. This can happen for different reasons, but you can also take into account some steps to solve it. In this article we are going to talk about it with the aim of being able to update correctly and not have any uncorrected vulnerabilities.

Why does error 0x8007371b appear when updating Windows?

This usually happens because there is a corrupt file . When installing a program or update, this is made up of different files and if one of them does not exist or is damaged, it can lead to problems of this type. This is what happens with the error 0x8007371b when updating Windows. Maybe a previous update left a corrupt file, for example. Another cause is that there is some bad configuration in a security program. This usually happens if you have an antivirus and it is not well configured or is not reliable. Even if you have more than one security application, they could generate interference. Therefore, if this is your case, this may be the reason why this error appears. In addition, a virus may be the cause of this error. They are usually behind many problems that appear when using the computer, such as failures when opening certain programs, using Wi-Fi or, as in this case, updating the system. This is another point that needs to be reviewed. On the other hand, a problem that can also lead to failures when updating Windows is that there is not a good network connection . You may have poor coverage or for some reason have lost signal at that moment and the update has been stopped. This will prevent the process from continuing normally.

What to do to fix it

After explaining the main causes of the 0x8007371b error when updating Windows , we are going to give some possible solutions that you can put into practice. In this way, you will be able to have the latest version of Windows and be able to make the most of the available resources, as well as improving security.

• Scan corrupted files on the system

The first thing you should do is scan for possible corrupt files that may be on the system. This is undoubtedly one of the main causes, so it is something you should take into account. It is a simple process and you will quickly be able to see if this was really the cause or if you have to keep looking. To scan for possible corrupt files, what you are going to do is go to Start, enter the Windows Terminal and run the sfc /scannow command . It will take a short time to finish, so you simply have to wait for it to finish and, once finished, restart the computer so that it can properly solve possible problems. Another option to scan for possible corrupt files is to run Dism commands , which is also useful for finding certain damaged files that may be on a computer. In this case, what you are going to do is run the following commands:

• Dism /online /cleanup-image /ScanHealth
• Dism /online /cleanup-image /CheckHealth
• Dism online /cleanup-image /RestoreHealth

As in the previous case, once it finishes, restart the computer and try updating Windows again and see if the error 0x8007371b continues to appear or has already been resolved and the process continues without problems.

• See if any security programs are causing problems

It is always advisable to have a good antivirus installed to scan for viruses and threats. However, sometimes they can cause problems. They can be the cause of errors like the one we are dealing with in this article and you should see if that is why Windows does not update properly. You should especially check if you have more than one antivirus or if you are using one that is not reliable. Our advice is to make sure that the antivirus is up to date and that you only have one installed. For example, it is common for users to have Microsoft Defender and, additionally, install another one. This sometimes generates conflicts and causes problems that affect operation. If you have recently installed any security program beyond the antivirus, you can also try disabling it at least temporarily and see if this way it updates without problems. Maybe that is the cause.

• Search for malware

Another point that you should not overlook is to look for possible security threats that may exist on your computer. For example, a malicious file that you have downloaded by mistake, a program that you have installed that turns out to be a virus, an email that you have received that has malware, etc. To do this, you should use a good antivirus. One example is the one we mentioned, Windows Defender, but you can also use other options such as Avast, Bitdefender or any other that you see as reliable. Of course, you should always make sure that it works correctly and is not going to cause any problems. It is important that you always check the security of Windows or any device, as they can generate problems of this type and prevent an application, an update, etc. from working correctly.

• Clear Windows Update Cache

The error 0x8007371b when updating Windows may be due to a problem with the cache that Windows Update stores. Therefore, what you are going to do in this step is simply delete it. This way you can check if you have access to the update process again without problems. What you have to do is go to Start, type Services and run it. There you have to look for Windows Update and make sure it is paused. To do this you can press the second mouse button and click on Stop to stop it. When you make sure that the service is stopped, open Windows Explorer through the Windows + E key combination and go to the drive where you have Windows, which will generally be C. There you look for the Windows folder , go to SoftwareDistribution and Download . You have to delete all the content that is there. Once this is done, restart the computer and start the update process again.

• Restart the installation agent

Another step you can take to avoid the 0x8007371b problem is to restart the Windows installation agent. To do this, go to Start, open the Terminal with administrator permissions and run net stop wuauserv . It will tell you that it has stopped correctly, which is what we want. Afterwards, what you have to do is run the command rd /s /q %systemroot%SoftwareDi and then run net start wuauserv to restart the installation agent. With this, you will have restarted it correctly and you will be able to see if this way the failure to update Windows has been solved or not. We also recommend that you restart the computer before starting the update again to avoid possible problems and make sure that it has been done correctly.

• Improve the connection

Another reason why this problem appears is due to a connection failure. Therefore, what you are going to do in this case is something as basic as checking that the connection is working correctly. You can do a speed test and see what you get, as well as try connecting via cable instead of Wi-Fi. If you see that the coverage you get is limited and that this is the cause, you should improve the wireless connection . For example, you can use a Wi-Fi repeater, a Mesh system or PLC devices. In this way you can take the connection to other places in the home and avoid dead zones that can be a problem. In short, as you have seen, there are different reasons why the error 0x8007371b appears when updating Windows. We have explained what steps must be taken to solve it and get it working normally again to have the latest version of the system installed without problems.

Error 0x800704ec

As you have seen, there are a large number of errors that can affect the network in Windows. It is important that you take action as soon as you notice that something is not right. This way you will be able to solve them and connect to the Internet normally. This can affect both the Wi-Fi network and also when connecting via cable. Small changes and adjustments will go a long way to making everything work correctly.

Why does it appear?

There are many errors that can appear on our Windows PC, but when this particular error occurs there are a number of very clear reasons behind this error message 0x800704ec.

This error appears when Windows blocks Microsoft Defender . Specifically, it is done by the system’s Group Policy. It can occur due to a bad configuration or a failure with the version of the operating system you have installed, which causes some features like this to malfunction.

The problem is that this failure will directly affect your security . It will cause the Windows antivirus to not work and you will not be able to perform a security scan or block possible malware in real time. It will put your system and any personal information you may have stored at risk. This usually appears when removing elements detected as dangerous. That is, the antivirus detects something as a possible threat, you know it is not and you click Discard, but the error 0x800704ec automatically appears. This failure also causes the antivirus to crash and stop working.

Another common reason for this error is having another antivirus installed . There are many antiviruses that you can install, both free and paid, but not all of them will work equally well. Sometimes they can cause conflicts with the Windows antivirus, so you should avoid having both installed.

What to do to fix it

After explaining the main causes of the 0x800704ec error appearing in Windows Defender, we will now explain what steps we should take to try to fix it. Normally, it is due to an error with the Group Policy, so you can configure it to make it work again. You can also use other options such as the Registry Editor.

• Group Policy

First of all, you will have to configure the Group Policy. If it is not configured correctly, it may be one of the reasons why this problem appears. If so, it has an easy solution and you just have to follow these steps that we are going to explain to make Windows Defender work correctly again. To access it, you have to press the Windows + R key combination and run gpedit.msc . You can also go to Start and search for Group Policy Editor and open it. Once you are there, you have to go to the following path: Local Computer Policy, Computer Configuration, Administrative Templates, Windows Components and Microsoft Defender Antivirus. You have to double-click and a box like the one you see in the image will appear.

You have to check the Not configured option and click OK. If that option was already checked, just leave it as is. It would not be the cause of the problem if that box was already checked.

• Registry Editor

The next thing you need to do is start the Registry Editor. It is possible that it is locked there and you will also be able to unlock it. You can access it again through the combination Windows + R and this time run regedit . You can also go to Start and search for Registry Editor and open it. Then you have to go to the following path: ComputerHKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWindows Defender Real-Time Protection. Inside you will see the DisableRealtimeMonitoring function and you have to right-click and delete it. In case this feature was activated in the Windows Registry Editor, it could be the reason why the error 0x800704ec appears in Windows Defender. You have to restart the system and check if this way the antivirus works normally again.

• Start Windows Security Service

You should also check that the Windows Security service is correctly activated and running. If it stops working, it can cause this type of failure. This can happen due to a bad configuration, that you have removed it by mistake or when installing an application and that it has generated an error. To configure it correctly you have to go to Start and look for Services. Inside you have to go to Windows Security Services and open it. Once opened you have to make sure that it is running. If it is not, simply press the Start button. Once this is done, press OK and restart the system so that the changes are carried out correctly. If the Windows Security service was disabled, after this step it will work normally again.

• Check that Windows is up to date

Have you updated Windows to the latest version? If not, you may have problems with certain components such as the antivirus. You should always have the latest versions available and make sure that the system works correctly at all times, with all the patches installed. To do this, you have to go to Start, enter Settings and click on Windows Update . It will automatically show you possible new files that you should install. Any that are available should be added to have the latest versions and correct any problems that may exist. Sometimes there may be conflicts or compatibility problems when using some Windows services when there is an outdated version. Therefore, it is something that you should do periodically and always make sure that you have an updated and well-protected system with Windows Defender running smoothly.

• Review other security programs

Having a good antivirus is essential to maintain security, but having two or more installed can be a problem. There could be incompatibility, crashes, and also false positives when downloading a program or opening any file that is actually completely safe. Therefore, if you have any other security program installed, you should stop it at least momentarily and see if this way the error 0x800704ec no longer appears in Windows Defender. Perhaps the cause is another antivirus you have installed, a firewall, or any other security tool. Here we could also include the use of a VPN . Sometimes it could generate conflicts with other programs, such as Microsoft’s antivirus, and prevent it from running normally. Therefore, if you browse through a VPN you should check it and try to stop it and see if this solves the error. In short, as you have seen, the 0x800704ec problem will cause Windows Defender to not run. This will cause your system to be unprotected and you may have security problems. You can follow the steps we have explained to configure it correctly and get it active again without any problems.