How to find out the password from Wi-Fi

Often passwords disappear completely, as if he did not know. This is a disaster, but not hopeless. Here the report describes how to find out the coveted combination of numbers and letters on the iPhone and not only.

How to find out the password from a Wi-Fi router

To find out the password for the Wi-Fi of your modem, you need to look at the tag on the back or below. It is near the inscription “SSID”. The cipher is long, combined with letters and numbers in upper and lower case.

You can look for the intricacies of numbers in the instructions for the router or in the packing box. If you have preserved the packaging and manual for the device, a copy of the sticker indicating the login password may be inside.

It is possible to bypass the tricky combination and connect by holding the “WPS” key (on the back). This should be done in 30 seconds or so. Sleight of hand will allow you to give access to Wi-Fi on a computer without knowing the code.

Not all routers can do this, so it is important to check the supplied device documentation (is there a WPS there). So, of course, you will not be able to determine the password, but you will be able to seamlessly connect to your personal Internet on your phone or computer. But how to find out the password, more on that below in the text.

By the way: How to set up remote access to a computer in Windows 10, Or 4 points to consider

How to find out the password for Wi-Fi on a computer

Below are the step-by-step methods for finding a saving combination from a computer with an operating system:


  1. Click on the Wi-Fi icon in the lower right corner.
  2. Then click on “Network settings”, then Wi-Fi, → “Change adapter settings” to pop up a panel for guidance.
  3. Click on “View connection status” → “Wireless network properties”, then – “Security”. There will be an option “Secure Network Key”, it is here that the coveted numbers are hidden.
  4. Just a little bit is left: stop at “Show symbols” (under “Network security key”), in “Key …” change to the required one.

If the combination of numbers and letters is unknown and the device is not connected, it will only be possible to connect via Ethernet. For a Mac, you’ll need to buy an Ethernet-USB-C or Thunderbolt 3 adapter. If Ethernet doesn’t work, you just need to reset your router.

So, let’s begin.

  1. Find out the IP of the router
    To get to the router’s page , you need to clearly understand what kind of IP it is:
  • The course for Windows: “Start”, → tap on the gear icon, → click on “Network and Internet”, → “View network properties” and write down the data indicated next to “Default code”.
  • Solution for Mac: Menu, → “System Preferences”, → click on “Network”, → “Advanced”, → TCP / IP, find the numbering that is to the right of “Router”.
  1. Visit the page of the gadget
    Select a search engine and rewrite the IP in the search line. It doesn’t matter which application is used.
  2. Visit the page of the gadget for distribution
    After entering the desired address, you may be asked to write a username and code; if so, you need to log into the system with the data of the router. They differ from those that are used to enter the Wi-Fi network. The factory default username is admin, the password is admin, blank or password. However, many people change them after installing the router, so a factory reset may be necessary.
    If there is a standard code and username, they should be printed in the documentation of the router or on it.
  3. Go to the item called “Wireless Communication”
    Going into the router, find “Wireless Communication”; Wi-Fi. You can often enter it by tapping on the tab at the top of the navigation menu. Their appearance will differ, therefore, you may have to go through several menus. The number combination can also be at the top of the dispenser home page.
  4. Find the password
    In “Wireless” will be the name of the desired SSID and the type of encryption. Next to Security Options, there is a Passphrase or Password. This is the desired character set.

Note: How to choose the right server: which of the 3 options is better


  • Select the image named Macfinder2.png Finder. Click on the Finder Utility icon, it’s like a blue face in the Mac Dock. On a Mac, you don’t need to connect to the internet to find out the cipher.
  • Click on Go in the menu on the left side of the screen.
  • Select Utilities from the Go menu.
  • Double click on the keychain. Its icon looks like a key in Utilities.
  • Choose your network name. This is the label that lights up when the Mac joins it.
  • Select “Show password” at the bottom of the window.
  • When prompted, enter the combination of the cipher that is used to log into the Mac laptop . If done correctly, the wi-fi code will be in the stock.

How to view the password for Wi-Fi on the phone

In the table, we give a guide to simple steps on how to find out the password for Wi-Fi on your phone: with iOS and Android OS .

Iphone and Android: table

IPhone Android
Locate wireless icon. The setting will depend on the brand of the device Go to mobile settings
Use the router’s IP address. Click on “Connections”
The viewing of saved codes on iPhone is limited due to the peculiarities of iOS
To bypass the bans, you first need to find the device’s ipishku for distribution to the iPhone, then get access to it in order to find out the code.
At the same time, it is important to be a user of a network whose password is unknown.
On the main screen of the iPhone, open “Settings”. Tap on the network. Click on Wi-Fi
Then click on the icon next to it – a window will open with information about the connection
Scroll to the next screen and touch the DHCP tab. There will be an ip next to Router, you need to write it down In the left corner of the bottom of the display, click on the QR code
On the iPhone, activate Safari, enter the ip and click Enter. Take a picture of the display with QR
You will have to enter the username and the code from the router.
If its code has not changed, in the lines where the user initials and password are indicated, admin and admin are prescribed
After logging into the system, you need to find “Wireless Network Settings” and click on it. Using a QR code such as QRScanner TrendMicro, upload a screenshot. This is done by clicking on the QR icon at the bottom left corner.
In a router, this option can be called differently, but with a similar name to make it easier to find
In the settings, select the option called “Wireless network security”. Now the long-awaited numbers and letters will be visible. In TrendMicro QRScanner is displayed twice with red rectangles
Immediately find the entry “Electronic key”. This is the information you need. When you click on this field, it will open

Educational article: How to check the battery of a smartphone: 4 tips

Can I find out the password using programs?

In Apple’s gadgets, there is Keychain Access, hidden in Utilities, and there is Applications. This is where you find all the codes your Mac remembers. Also, there is a KisMAC application, Reaver-wps.

On Windows, you can find out the code for the Wi-Fi you are using right now using NirSoft’s WirelessKeyView, Magical Jelly Bean Wi-Fi password revealer. But you need to be careful with identifiers of codes, because some of them can be malicious.

Interesting article: Huawei y5 2019: an overview of 6 fundamental parameters

Password reset

If it was not possible to calculate the cipher by the methods presented above, then this can no longer be done. You need to reset your settings. This will not identify the desired numbers, but will return them to the original ones. They are printed on the back.

This action will also detach all items connected to the router. Therefore, this should be the last possible action. So, let’s begin:

  1. Find “Reset” 
    on the back of the gadget.
  2. Hold down “Reset” for at least 10 seconds
    so that the router reboots completely. The lights on it should blink or go out briefly when it is completely rebooted.
  3. Remember or write down the default router data
    These are written at the bottom and include the following:
  • SSID is the factory name that is written on the network menu.
  • The password is the standard wi-fi code.
  1. Connect to the Internet
    Enter the factory code printed on the bottom of the dispenser.

Based on what is given above, you can easily figure out how to find out the password for your wi fi. There is no need to pay for utilities, nor do you need to sit for hours. Here you need to act clearly, guided by the tips from the article. Having found out the ill-fated cipher, reset and install another. It’s better not to rely on memory, but to write it down and keep it in a secluded but visible place.

by Abdullah Sam
I’m a teacher, researcher and writer. I write about study subjects to improve the learning of college and university students. I write top Quality study notes Mostly, Tech, Games, Education, And Solutions/Tips and Tricks. I am a person who helps students to acquire knowledge, competence or virtue.

Leave a Comment