How to Enable and Disable Safe Mode on Android Devices

Safe mode is used to leave the phone with the applications that come from the factory and without being able to access any additional information that the owner of the device has in it. We are going to quickly learn how to enable and disable safe mode on Android devices in an easy and fast way.

How to Activate and Deactivate Safe Mode on Android Devices – Quick and Easy

Generally most Android mobile phones end up in this mode when the pattern or password is entered wrongly several times. At other times it may happen because the device has some kind of problem.

Be that as it may, we are going to see how to activate it, what it is for and above all how to remove or deactivate the safe mode in Android.

How to turn on or enable safe mode

Safe mode is available for devices running Android 4.1 or higher . It is quite easy to activate it generally, although it may vary depending on the version of the operating system the phone has.

In some versions, just by holding the device’s shutdown button, a pop-up message will appear where we can see the “ Safe Mode ” option . This will cause the phone to restart in safe mode.

The other way to do it is through the status bar which we will access by sliding our finger from top to bottom. You simply activate “Safe Mode” and once you restart the device it will do so in this mode with limited functions.

Safe mode is also activated when your device has a problem with an installed application, if this is the case we recommend you  solve these errors with iMyFone Fippo

How to disable and remove safe mode

The security mode is, precisely, a security measure for when the unlock code is entered several times incorrectly. The easiest way to remove Android’s safe mode is by restarting the device.

To achieve this, all you have to do is press and hold the power button until the pop-up message appears where it gives us the option to restart the phone . In case the reset option is not found, turn it off and on again.

In case this doesn’t fix it. You can force a restart, for this you will simply have to turn off the phone and while you turn it on you must leave the volume down key while it is starting. However, if you still can’t get out of this mode, you have a problem with the device’s software.

In case the above methods don’t work, the only alternative left is to factory reset the phone . This means that the applications downloads, photos, videos, etc. It will be removed from it, the phone is back as if you had never used it, as if it were the first time you turn it on.

For this you must go to the ” Settings ” menu and then to ” Backup and restore ” now you will have to check the ” Backup ” box and then ” Factory data reset “. We recommend that you have a battery level greater than 60% before starting this process.

If you cannot do it from the menu, you will have to use a key combination with the phone turned off in order to factory reset it. The only bad thing about this method of restarting the device is that you cannot make a backup copy so you will lose all your information.

The key combination varies depending on the model and brand of the device. Therefore, you should search the internet for how to do a hard reset of your specific model or look at its manual.

Once you enter the hard reset menu you must go to ” Wipe Data / Factory Reset ” and then choose ” Yes “. The process will begin that will not take too long. Likewise, the first time you start the device it may take longer than normal.

Working in safe mode tends to be somewhat complicated, that is why if you want to restart your phone while in safe mode follow these steps.


Leave a Comment