Today, we have in our hands an HP 800 G3 in SFF form factor. It may sound complicated, but we assure you that we are going to keep it simple so that you can upgrade your machine. We are going to increase the RAM, install a low-profile graphics card, and add an SSD hard drive along with an M.2 NVMe module. So, without further ado, let’s get to work!
HP EliteDesk 800 G3 SFF Upgrade Guide: Boost Your PC in 6 Steps
Hello everyone! This time, we’re going to dive into the exciting world of computer upgrades. Today, we’re going to talk about how to upgrade an HP EliteDesk 800 G3 SFF. Get ready to take your computer to the next level!
Step 1: Getting to know your HP EliteDesk 800 G3 SFF
Let’s start by taking a look at the machine in general. There’s a wide variety of ports on the front, including USB-C, USB 2.0, and USB 3.0. You’ll also find audio inputs and outputs, as well as the power button. On the back, you’ll find more USB ports, DisplayPort ports for connecting monitors, and an RJ45 slot for internet connectivity.
Step 2: Disassembling the equipment
To begin the upgrade process, we need to open the case. Carefully push out from the sides to remove the side cover. You also need to remove the front panel to access the inside of the computer. This is done by sliding up and gently pulling away.
Step 3: Boost your memory with a RAM upgrade
Let’s start with something fundamental: RAM. Imagine RAM as your computer’s workbench, where you put all the tasks you need to perform at any given moment. Now, let’s expand that workbench so you can do more things at once.
- Open the box of your HP EliteDesk 800 G3 SFF carefully.
- Find the RAM slots on the motherboard. There are four of them.
- Use DDR4 memory modules, snapping them into the slots with a gentle click until they lock into place.
- Done! Your computer now has more space to work with demanding applications and tasks.
Step 4: Speed and storage with SSD and M.2 NVMe hard drive
We’re giving your computer a speed boost by adding two lightning-fast storage types.
- Install an SSD hard drive into a suitable bay on the front of the computer. Connect it to the motherboard using the SATA and power cables.
- Add an M.2 NVMe module into the corresponding slot on the motherboard. Make sure to secure it with the appropriate screw.
- These drives will allow you to load applications and files in the blink of an eye.
Step 5: Add graphics power with a Low Profile Card
Now, let’s improve the visual part of your computing experience by installing a low-profile graphics card. Imagine this card as the powerful engine of a sports car, only in the computing world!
- Find the bays where you will install the graphics card on the back of the computer.
- Choose a compatible graphics card, such as an NVIDIA NVS 310 1GB.
- Connect the graphics card to the corresponding port on the motherboard.
- Secure the graphics card in place and close the computer case again.
Step 6: Reassemble and you’re done
Now that everything is in place, your HP EliteDesk 800 G3 SFF is ready to shine. All that’s left to do is re-assemble the front cover and close the case.
- Align the tabs on the front case and carefully snap it into place.
- Make sure the connections on the back are properly seated before closing the case.
- Make sure everything is in its place and that’s it!
If you missed any steps, check out our next video!