How to activate Bluetooth on Nintendo Switch

You have always been a big fan of Nintendo and have bought almost all the consoles produced by the famous Japanese giant. With the arrival of the Nintendo Switch , you are in possession of a console with which you can play both comfortably in the living room and on the move. In this regard, when you are away from home, such as on public transport or in a place where you cannot make noise, always connect a wired headset to the console, but you would like to know if it was possible to associate a wireless pair.

Unfortunately, however, looking through the system settings, you have not found any option to enable the wireless interface of the console and, therefore, you would like to know how to activate Bluetooth on the Nintendo Switch and pair with the headphones in your possession. How do you say? Are things actually like this? Then you will be happy to know that, in the next chapters, you will find all the information you need to do so. Also, in case you want to enable the Bluetooth interface to activate the Joy-Con in airplane mode, I will also explain how to do this simple operation.

Well: let’s not get lost in other chat and let’s start immediately. All you have to do is sit comfortably and carefully read the tips you’ll find in the next chapters, which apply to both Switch and Switch Lite (the handheld-only console model). Having said that, I just have to wish you a good read and, above all, a good time!

Index

  • How to activate Bluetooth on Nintendo Switch
  • How to turn on Bluetooth on Switch in airplane mode

How to activate Bluetooth on Nintendo Switch

If you want to know how to activate Bluetooth on Nintendo Switch , know that this, by default, is already enabled, so as to allow the controllers (Joy-Con) to be able to send command signals when disconnected from the central body, to play the console in TV mode.

Unfortunately, however, this specific interface of Switch and Switch Lite cannot be used to connect other devices, such as Bluetooth headphones . To connect such devices to the console, you need to purchase an external receiver or adapter to connect to the Nintendo Switch. So let’s see in detail what it could do for you.

If you have any Bluetooth earphones or headphones that you have already paired with your smartphone or tablet, know that all you have to do is purchase an external USB-C transmitter to connect to the appropriate port on the Nintendo Switch.

In fact, having no possibility to manage the Nintendo Switch Bluetooth interface already integrated, your only solution is to use an external receiver that acts as a “bridge” between the console and the wireless headphones, putting them in communication. You should know that there are several models of Bluetooth receiver, such as those listed below.

 

GULIkit Route Air + Bluetooth Adapter for Nintendo Switch & Switch L …

See offer on Amazon

 

Homespot Bluetooth 5.0 Audio Transmitter Adapter With …

See offer on Amazon

 

ZIOCOM Bluetooth Adapter for Nintendo Switch, Bluetoo Transmitter …

See offer on Amazon

 

All the products I mentioned above consist of a small device with a USB-C port to be connected to the appropriate USB-C input on the underside of the Nintendo Switch. Some of these models are small and compact, so that they are one with the console itself.

In addition, they may already come with a USB adapter to allow connection to the USB-A port on the Nintendo Switch base. Also in this case, this kind of adapters is convenient when playing this console both on the move and in TV mode.

To pair the headset with the console, all you need to do is hold down the pairing button on the receiver until the LED starts flashing quickly. Once this is done, perform the same operation on the headphones, pressing the pairing button (or the combination to activate pairing mode, which you can find in the device manual) until the indicator light warns you that the headphones are ready to pair.

Well: if you have followed my instructions to the letter, the LEDs should stop flashing, with a steady light to indicate that the two devices have been paired. For a correct procedure, however, refer to the instruction manual of the receiver and headphones.

If you don’t want to “occupy” the Switch’s USB-C port, you can then opt for Bluetooth receivers to connect to the console’s audio jack input , which will capture the sound from this port. This kind of devices are very similar in their operation to those I have indicated to you in the previous paragraphs. Below you will find a list of some products of this kind that may be of interest to you.

 

Aigital Bluetooth Transmitter and Receiver, 3.5 mm Stereo Audio Adapter …

See offer on Amazon

 

AUKEY Bluetooth Receiver 5 Portable Audio Adapter with 12 Hours of …

See offer on Amazon

 

Mpow New V5.0 Bluetooth Receiver with CSR Core, 12 Hours Playtime and 3 …

See offer on Amazon

 

When choosing Bluetooth receivers, favor those devices that support the latest wireless protocols, such as Bluetooth 5 and later. Bluetooth 4.x ones can also work . which are equipped with the Low Energy protocol , i.e. low consumption, which prevents the Nintendo Switch battery from draining faster when using wireless headphones.

If, on the other hand, you have PC headphones already equipped with a USB wireless adapter to transmit the audio signal, buying a Bluetooth receiver may be useless, even if most of this type of headphones also offer the possibility of pairing via Bluetooth ( for greater compatibility with Android and iOS / iPadOS mobile devices).

In this case, the alternative is to purchase a USB-C to USB-A adapter , so that you can connect the USB receiver of the wireless headphones directly to the Nintendo Switch. Below you will find some solutions that might be right for you.

You can, therefore, decide to use an adapter with only one USB port or opt for one that allows you to have a few more. In general, any adapter should be fine. The only unknown is the wireless USB receiver of the headphones, which may not be correctly recognized by the Nintendo Switch.

How to turn on Bluetooth on Switch in airplane mode

As I already told you in the previous chapter , the Nintendo Switch uses the integrated Bluetooth interface to maintain communication with the Joy-Con, when they are disconnected from the central body, to play in TV mode.

Unfortunately, in case you need to activate airplane mode , the Joy-Con cannot be disconnected, as they will not work: this happens because the radio interface of the console is deactivated, as well as the Wi-Fi, when airplane mode is active on the console.

In any case, you can also disable this restriction, acting directly from the console settings panel. Don’t know how to do it? Do not worry! I’m here to provide you with all the answers you need.

First, turn on your Nintendo Switch and follow the on-screen instructions to access its main screen. Once this is done, press on the gear icon located at the bottom and, through the sidebar, locate the Airplane mode tab .

At this point, if the airplane mode is already set to Yes , all you have to do is activate the Yes item near the wording Communication with controllers (Bluetooth) . Now, the last step is to unplug the Joy-Con in order to play the console in TV mode.

Warning: Activating the Bluetooth interface when the Nintendo Switch is in airplane mode is not recommended if you are in places where radio interference is prohibited. Therefore, first make sure you can activate this option without breaking any rules and thus avoiding putting your health and that of others at risk.

 

by Abdullah Sam
I’m a teacher, researcher and writer. I write about study subjects to improve the learning of college and university students. I write top Quality study notes Mostly, Tech, Games, Education, And Solutions/Tips and Tricks. I am a person who helps students to acquire knowledge, competence or virtue.

Leave a Comment