The function of the hard drive is very important, and the data you are saving is also very important. That is why we care a lot about the information that is stored there . For this we make frequent backups so that at some point of failure, the data is secured. But if by chance we have not taken these precautions, what could we do?
There are endless possibilities to recover data from hard drive when it is failing. We can make a backup on an external hard drive, with a partition to avoid this. But we will be teaching you the ways of how to recover data from a hard drive that is failing and cannot be repaired.
How can I RECOVER DATA from my failing HARD DRIVE? – Don’t lose files
Index( )
- How to know if the hard drive has irreparable damage?
- What are the types of failure that a hard drive can have?
- How to recover data from a hard drive that won’t boot?
- What procedure should be followed to recover data from an external hard drive?
- What is the best program to recover your data and how to use it?
- Disk Drill
How to know if the hard drive has irreparable damage?
To realize that our hard drive is not in optimal conditions, we must first see how it works. In this way we can deduce if it is faulty or not. A very obvious problem that can happen is that the hard drive boots, but does not send video . This is because you are not getting the listed voltages.
Another of the most common problems is that the computer freezes more often. In Windows, the famous blue screen and other problems usually appear . But these can be solved by isolating the bad sectors by reinstalling the operating system on the computer.
What are the types of failure that a hard drive can have?
- Hard drive boot failures. Due to this problem, it will not be sending video to the screen, it will be running the disk but without sending video
- The computer turns itself off
- Sectors of the hard drive will be blacked out, causing the screen to look a bit distorted
- The monitor image will be seen in poor quality. Or it may happen that the image freezes in one color
- Excessive dust will damage the hard drive, preventing it from working properly.
- Wear on the platters or hard drive motor. It will make the boot of this device improper
How to recover data from a hard drive that won’t boot?
Before seeing if the hard drive has really stopped booting properly, we must install the hard drive in another computer. The fact that it may be that the primary computer is having connector failures and that is why it does not allow us to recognize the hard drive. We can find out why your computer does not recognize the hard drive, USB or flash drive.
If this is not the case, we can go on to use a data recovery program, which has a starter version. With this, you install the bootable version on any flash drive, be it USB or DVD , to use it to boot the computer. Thanks to these programs, we can start the computer without having to do anything with the hard drive.
In this case, after starting the computer, we can access the computer’s hard drive without any problem. From here, we can do the task of recovering the data we are looking for. But of course, this has a small limitation. These programs usually have a limit on the capacity of information that we can recover
What procedure should be followed to recover data from an external hard drive?
Just like recovering files from normal hard drives, we can do it with an external one as well. With the help of a recovery program, we can do a scan on the damaged external hard drive and see what we can recover. We recommend that you use and install the Recoverit Data Recovery program on your computer.
With this program we can use for free. We can do a scan on the disk and see the files that we can recover. First you must insert the external drive , then click on ‘start’ and then on the External Devices option. It should be noted that if you have Windows 7 you can start by doing an error check.
You will only have to wait for the scan, it will be showing you the files that it has recovered and in the ‘Recover’ option you will be able to restore all that data that you had lost
What is the best program to recover your data and how to use it?
Today, there are endless programs available to recover data from a hard drive that is damaged or does not want to boot. That is why here, we make you known and we recommend that you use, what is for today, the best data recovery program, called Disk Drill.
Disk Drill
This data recovery software is one of the best on the market today. With it, we can make the data on a previously formatted hard drive reappear as if nothing had happened. And best of all, it is available for both Windows and Mac OS X systems. Just go to the Disk Drill page to start using it:
- At the time of starting the Software, it will be scanning all the hard drivesthat are in the computer. As well as all the units that are connected to the computer.
- The application itself, will create a small database, with the files that were deleted from the unit.
- In the ‘Recover’ window, we can see the available data recovery options.
- Choosing the first option that it shows us, it will be scanning and will show us the files that we can recover.